EPORIP TURBO part A

Remove casualty to fresh air and keep warm and at rest.

Immediately take off all contaminated clothing. Areas of the body that have - or are only even suspected of having - come into contact with the product must be rinsed immediately with plenty of running water and possibly with soap. Wash thoroughly the body (shower or bath). Remove contaminated clothing immediately and dispose of safely. After contact with skin, wash immediately with soap and plenty of water.

Symptoms: Skin Irritation, Erythema

After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. Protect uninjured eye.

Symptoms: Eye irritation, Eye damages

Do not induce vomiting, get medical attention showing the SDS and the hazard label.

In case of fire, use a dry powder fire extinguisher to extinguish.

None in particular.

Do not inhale explosion and combustion gases. Burning produces heavy smoke.

Move undamaged containers from immediate hazard area if it can be done safely.

For non emergency personnel: Wear personal protection equipment. Remove all sources of ignition. Remove persons to safety. See protective measures under point 7 and 8. For emergency responders: Wear personal protection equipment.

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.

Wash with plenty of water.

Avoid contact with skin and eyes, inhalation of vapours and mists. Exercise the greatest care when handling or opening the container. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.

Cool and adequately ventilated. Storage at higher temperatures requires an appropriate evaluation of preventive and protection measures to be adopted.

Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.

Take precautionary measures against static discharge. Keep away from unguarded flame, sparks, and heat sources.

Not available

Suitable materials for safety gloves; EN ISO 374: Polychloroprene - CR: thickness >=0.5 mm; breakthrough time >=480 min. Nitrile rubber - NBR: thickness >=0.35 mm; breakthrough time >=480 min. Butyl rubber - IIR: thickness >=0.5 mm; breakthrough time >=480 min. Fluorinated rubber - FKM: thickness >=0.4 mm; breakthrough time >=480 min. Neoprene gloves are suggested (0.5 mm) not recommended gloves: not waterproof gloves

Use close fitting safety goggles, don't use contact lenses.

Respiratory protection must be used where exposure levels exceed workplace exposure limits. Refer to appropriate EN standards, like EN 136, 140, 143, 149, 14387 for information on selection and use of appropriate respiratory protection equipment. In case of insufficient ventilation use mask with ABEKP filters (EN 14387).

Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.

Stable under normal conditions

Stable under normal conditions

None.

Stable under normal conditions.

Avoid contact with combustible materials. The product could catch fire.

None.