Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EPO-TEK® 302-3M-R PART A
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesives adhesives
Uses advised against
Not to be used for any purpose other than the one the product was designed for
Manufacturers & Suppliers
Epoxy Technology, Inc.
manufacturer
14 Fortune Drive, Billerica, MA, 01821, USA
978-667-3805
http://www.epotek.com
Emergency Contacts
ChemTel
+1 (800) 255-3924
ChemTel
+1 (813) 248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy phenol novolac resin | 9003-36-5 | 60% | Yes |
Notes
Components not listed are either non-hazardous or are below reportable limits.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: Irritation. May cause an allergic skin reaction.
Rinse eyes with water as a precaution.
Call a poison center/doctor/physician if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapors/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal protective equipment. Avoid breathing dust/fume/gas/mist/vapors/spray.
Store in a well-ventilated place. Keep cool.
Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Wear suitable gloves resistant to chemical penetration. Neoprene or nitrile rubber gloves. Butyl-rubber protective gloves. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. Refer to manufacturer's information. Gloves must be replaced after each use and whenever signs of wear or perforation appear
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Toxic to aquatic life with long lasting effects.
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
Not readily biodegradable in water.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substances, liquid, n.o.s. (Epoxy Phenol Novolac)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EPO-TEK® 302-3M-R PART A?
The signal word is warning.
What is the physical form of EPO-TEK® 302-3M-R PART A?
EPO-TEK® 302-3M-R PART A is a liquid with clear color. It has mild odor odor.
What is the solubility of EPO-TEK® 302-3M-R PART A?
No data available
What is EPO-TEK® 302-3M-R PART A used for?
adhesives adhesives
What are the hazard statements for EPO-TEK® 302-3M-R PART A?
This substance has 4 hazard statements:
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H401: Toxic to aquatic life
- H411: Toxic to aquatic life with long lasting effects
What is the melting point of EPO-TEK® 302-3M-R PART A?
The melting point is Not applicable and the boiling point is No data available.