Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOLYKOTE(R) P-37 ANTISEIZE PASTE
- Product Code
- 000000000002322374
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants and lubricant additives
Manufacturers & Suppliers
Dow Corning Corporation
manufacturer
South Saginaw Road, Midland Michigan 48686
(989) 496-6000
Emergency Contacts
Dow Corning Corporation
(989) 496-5900
CHEMTREC
(800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Inorganic and organic compounds Mixture
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Wash with water and soap as a precaution. Get medical attention if symptoms occur.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention immediately.
Symptoms: Causes serious eye damage.
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
None known.
Exposure to combustion products may be a hazard to health.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.
For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container.
Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.
Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent material, suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not swallow. Do not get in eyes. Avoid prolonged or repeated contact with skin. Handle in accordance with good industrial hygiene and safety practice. Keep container tightly closed. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labeled containers. Keep tightly closed. Store in accordance with the particular national regulations.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Can react with strong oxidizing agents. When heated to temperatures above 150 °C (300 °F) in the presence of air, trace quantities of formaldehyde may be released. Adequate ventilation is required. See OSHA formaldehyde standard, 29 CFR 1910.1048
None known.
Oxidizing agents
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOLYKOTE(R) P-37 ANTISEIZE PASTE?
The signal word is danger.
What is the physical form of MOLYKOTE(R) P-37 ANTISEIZE PASTE?
MOLYKOTE(R) P-37 ANTISEIZE PASTE is a solid appearing as paste with gray color.
What is MOLYKOTE(R) P-37 ANTISEIZE PASTE used for?
Lubricants and lubricant additives
What are the hazard statements for MOLYKOTE(R) P-37 ANTISEIZE PASTE?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of MOLYKOTE(R) P-37 ANTISEIZE PASTE?
The melting point is No data available and the boiling point is Not applicable.