NextSDS Logo
Safety Data Sheet EN

Ultra Clear Waterproof Roof Sealant Cartridge

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ultra Clear Waterproof Roof Sealant Cartridge
Product Code
1070304

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Emergency Contact

1-800-535-5053

Emergency Contact

1-352-323-3500

Emergency Contact

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Carc. Cat. 2
Eye Irrit. Cat. 2A
Flam. Sol. Cat. 1
Repr. Cat. 2
Skin Irrit. Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H228 Flammable solid.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H351 Suspected of causing cancer.
H361 Suspected of damaging fertility or the unborn child.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/.../ equipment.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P281 Use personal protective equipment as required.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use... to extinguish.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Styrene-Ethylene/Butylene-Styrene Block Copolymer 66070-58-4 10 - 30% Yes
White mineral oil 8042-47-5 10 - 30% Yes
1,2,4-Trimethylbenzene 95-63-6 10 - 30% Yes
Aromatic hydrocarbon 64742-95-6 10 - 30% Yes
Hydrogenated styrene isoprene block copolymer 68648-89-5 5 - 10% No
Styrene-alphamethylstyrene 9011-11-4 3 - 7% No
1,3,5-Trimethylbenzene 108-67-8 1 - 5% Yes
Diethylbenzene 25340-17-4 1 - 5% Yes
Cumene 98-82-8 0.1 - 1% Yes
Ethyl benzene 100-41-4 0.1 - 1% Yes

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air. If continued breathing difficulty is experienced, get medical attention immediately. NOTE: Only trained personnel should administer artificial respiration or give oxygen.

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing.

Eye contact

If material gets into eyes, flush with water immediately for 15 minutes. Consult a physician.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately if continued breathing difficulty is experienced, if skin symptoms persist, if eye contact occurs, or if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

Vapor from this material will readily ignite at temperatures above 150 degrees F if an ignition source is present. Vapors may form an explosive mixture with air at temperatures above 150 degrees F. Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations. Dike to prevent entering any sewer or waterway. Transfer liquid to a holding container. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Read all product instructions before using. Personal protective equipment should include impervious gloves, protective eye wear, and suitable work clothes. Scrape up dried material and place into containers.

Environmental

No Information

Cleanup methods

Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling.

Storage

Store away from sources of ignition and heat. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

Wash thoroughly after handling.

Fire prevention

Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Pressure
---
Voc Content
---
Solubility
---
Flash Point
Pensky-Martens Closed Cup: 49 °C
State Under Standard Conditions
---
Melting Point
---
Relative Density
---
Form
---
Softening Point
---
Upper Explosive Limit
N.E.
Evaporation Rate
Not Established
Vapor Density
Heavier Than Air
Solubility In Water
Not Established
Colour
Clear
Ph
Not Applicable
Relative Evaporation Rate
---
Kinematic Viscosity
---
Lower Explosive Limit
N.E.
Bulk Density
---
Physical State
Solid
Cloud Point
---
Decomposition Temperature
Not Established
Solubility In Fat
---
Partition Coefficient
---
Metal Corrosion
---
Freezing Point
Not Established
Auto Ignition Temperature
Not Established
Physical State Data
liquid
Molecular Weight
---
Explosive Limits
---
Properties Status
---
Dynamic Viscosity
Not Established
Colour Intensity
---
Density
0.93 g/cm3
Appearance
Paste
Solidification Point
---
Crystallisation Point
---
Boiling Point
168 - 185 °C
Odor
Solvent
Flammability
---
Odor Threshold
Not Established
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Do not smoke.

Incompatible

oxidizing agents, strongly alkaline and strongly acid materials, strong oxidizing agents, heat, open flames, strong acids and strong bases.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3175
Shipping Name
Solids containing flammable liquid, n.o.s.
Transport Class
4.1 Flammable solid
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ultra Clear Waterproof Roof Sealant Cartridge?

The signal word is danger.

What is the physical form of Ultra Clear Waterproof Roof Sealant Cartridge?

Ultra Clear Waterproof Roof Sealant Cartridge is a solid appearing as paste with clear color. It has solvent odor.

What is Ultra Clear Waterproof Roof Sealant Cartridge used for?

Caulking Compound

What are the hazard statements for Ultra Clear Waterproof Roof Sealant Cartridge?

This substance has 6 hazard statements:

  • H228: Flammable solid.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H332: Harmful if inhaled.
  • H351: Suspected of causing cancer.
  • H361: Suspected of damaging fertility or the unborn child.