Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Waterproof Patch & Seal Spray (Clear)
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Aerosol spray product
Manufacturers & Suppliers
The Gorilla Glue Company
manufacturer
2101 E. Kemper Road, Cincinnati, OH 45241
513-271-3300
http://www.gorillatough.com
Emergency Contacts
Prosar
1-800-420-7186
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The data for this section has not been processed yet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Obtain medical attention if breathing difficulty persists. First, take proper precautions to ensure your own safety before attempting rescue (e.g. wear appropriate respiratory protective equipment, use the buddy system), then remove the exposed person to fresh air. Keep at rest in a position comfortable for breathing.
Symptoms: High concentrations may cause central nervous system depression such as dizziness, vomiting, numbness, drowsiness, headache, and similar narcotic symptoms. In elevated concentrations may cause asphyxiation, central nervous system effects, and increased breathing rate. Symptoms of asphyxiation include headache, dizziness, rapid breathing, increased pulse, mood changes, tremors, cyanosis, muscular weakness, narcosis, numbness of the extremities, unconsciousness and death.
For brief contact with a small amount: Rewarm with body heat. Get immediate medical advice/attention. For extensive contact or a large amount: Immediately call a poison center/doctor and follow their advice. Specific treatment is urgent, incorrect first-aid practices will aggravate the injury. Protect affected area with a loose cover until proper medical treatment is received.
Symptoms: Contact with gas/liquid escaping the container can cause frostbite and freeze burns. Redness, pain, swelling, itching, burning, dryness, and dermatitis.
Immediately rinse with water for at least 15 minutes. If frostbite or freezing occurs, immediately flush with plenty of lukewarm water to GENTLY warm the affected area. Do not use hot water. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if irritation develops or persists.
Symptoms: Contact with gas/liquid escaping the container can cause frostbite, freeze burns, and permanent eye damage. Contact causes severe irritation with redness and swelling of the conjunctiva.
Do NOT induce vomiting. Rinse mouth. Immediately call a POISON CENTER or doctor/physician.
Symptoms: Not considered a potential route of exposure, but contact with gas/liquid escaping the container can cause freeze burns and frostbite. Aspiration into the lungs can occur during ingestion or vomiting and may cause lung injury.
Immediate Medical Attention
Get immediate medical advice/attention. Immediately call a poison center/doctor. Obtain medical attention if breathing difficulty persists. Obtain medical attention if irritation develops or persists.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, carbon dioxide, or regular foam.
Do not use a heavy water stream. Use of heavy stream of water may spread fire.
Flammable aerosol. Container may explode in heat of fire. Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns and injuries. Reacts violently with strong oxidizers. Increased risk of fire or explosion.
Use water spray or fog for cooling exposed containers. Fight fire remotely due to the risk of explosion. DO NOT fight fire when fire reaches containers. Evacuate area.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Stop leak if safe to do so. Ventilate area. Isolate. Eliminate ignition sources.
Prevent entry to sewers and public waters. Avoid release to the environment.
Clean up spills immediately and dispose of waste safely. Consider the use of water spray to disperse vapors.
Related Products
Similar products with comparable safety profiles
Waterproof Patch & Seal Liquid (Clear)
---
Waterproof Patch & Seal Spray -- White
---
Waterproof Patch & Seal Liquid (White)
---
Waterproof Patch & Seal Liquid (Black)
---
Waterproof Patch and Seal Paste – White
---
Waterproof Patch and Seal Paste – Black
---
Gorilla Waterproof Patch and Seal Spray - Black
---
Ultra Clear Flexible All Purpose Waterproof Sealant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid contact with skin, eyes and clothing. Do not spray on an open flame or other ignition source.
Store in a dry, cool place. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Store locked up/in a secure area. Keep only in the original container in a cool, well ventilated place away from ignition sources. Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F.
Handle in accordance with good industrial hygiene and safety procedures.
Do not spray on an open flame or other ignition source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure adequate ventilation, especially in confined areas. Ensure all national/local regulations are observed. Use explosion-proof equipment. Gas detectors should be used when flammable gases or vapors may be released. Proper grounding procedures to avoid static electricity should be followed. Oxygen detectors should be used when asphixiating gases may be released.
Wear protective gloves. If material is cold, wear thermally resistant protective gloves.
Chemical safety goggles.
Insufficient ventilation: wear respiratory protection. Respiratory protection of the dependent type. Use a NIOSH-approved self-contained breathing apparatus whenever exposure may exceed established Occupational Exposure Limits.
Wear suitable protective clothing. Chemically resistant materials and fabrics. Wear fire/flame resistant/retardant clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Contains gas under pressure; may explode if heated. Flammable aerosol. Pressurized container: may burst if heated.
Reacts violently with strong oxidizers. Increased risk of fire or explosion.
Hazardous polymerization will not occur.
Direct sunlight, extremely high or low temperatures, open flames, sources of ignition and incompatible materials. Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.
Oxidizers. Heat sources. Acids. Nitrosating agents. Alkalis. Strong reducing agents.
Not expected to decompose under ambient conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Waterproof Patch & Seal Spray (Clear)?
The signal word is danger.
What is the physical form of Waterproof Patch & Seal Spray (Clear)?
Waterproof Patch & Seal Spray (Clear) is a liquid appearing as clear . It has not available odor.
What is the solubility of Waterproof Patch & Seal Spray (Clear)?
Not available
What is Waterproof Patch & Seal Spray (Clear) used for?
Aerosol spray product
What are the hazard statements for Waterproof Patch & Seal Spray (Clear)?
This substance has 11 hazard statements:
- H222: Extremely flammable aerosol.
- H270: May displace oxygen and cause rapid suffocation.
- H280: Contains gas under pressure; may explode if heated.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H361: Suspected of damaging fertility or the unborn child.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H401: Toxic to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Waterproof Patch & Seal Spray (Clear)?
The melting point is Not available and the boiling point is Not available.