NextSDS Logo
Safety Data Sheet EN

Blacktop Asphalt Low VOC Sealant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Blacktop Asphalt Low VOC Sealant
Product Code
7995501

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Carc. Cat. 2
Eye Irrit. Cat. 2A
Skin Irrit. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H351 Suspected of causing cancer.

Precautionary Statements

P201 Obtain special instructions before use.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P281 Use personal protective equipment as required.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see _ on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Asphalt 8052-42-4 10 - 30% Yes
Silica, amorphous 7631-86-9 7 - 13% Yes
Calcined Clay 66402-68-4 5 - 10% Yes
alpha-Alumina 1344-28-1 3 - 7% Yes
Iron oxide 1309-37-1 1 - 5% Yes
Potassium oxide 12136-45-7 1 - 5% Yes
Titanium dioxide 13463-67-7 0.5 - 1.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air. If continued breathing difficulty is experienced, get medical attention immediately. Move the person to fresh air. If breathing has stopped, apply artificial respiration. Call a doctor.

Symptoms: respiratory tract irritation, headache, dizziness, nausea, gastrointestinal disturbances, coughing, a sensation of dryness and pain in the nose, throat and chest, confusion and unconsciousness

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing.

Eye contact

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately if continued breathing difficulty is experienced, if symptoms persist (skin), if eye contact occurs, or if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Instructions

Wear self contained breathing apparatus for fire fighting if necessary.

Firefighter Protection

Wear self contained breathing apparatus for fire fighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations.

Environmental

No Information

Cleanup methods

absorb with inert material

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Keep containers closed when not in use. Avoid breathing vapor and contact with eyes, skin and clothing. Use in well ventilated area. Wash thoroughly after handling.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Paste
Colour
Black
Colour Intensity
---
Form
---
Odor
Slight Solvent
Odor Threshold
Not Established
Ph
Not Applicable
Melting Point
---
Boiling Point
N.A. Mixture w/o a constant boiling point.
Flash Point
Not Available.
Freezing Point
Not Established
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not Established
Vapor Pressure
Not Established
Vapor Density
Not Established
Relative Density
---
Bulk Density
---
Density
1.33 g/cm3
Flammability
---
Upper Explosive Limit
N.E.
Lower Explosive Limit
N.E.
Explosive Limits
---
Auto Ignition Temperature
Not Established
Decomposition Temperature
Not Established
Solubility
---
Partition Coefficient
Not Established
Solubility In Water
Not Established
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not Established
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal temperatures and pressures.

Avoid

Excessive heat and freezing. Avoid contact with skin, eyes and clothing.

Incompatible

Strong acids and strong bases.

Decomposition

Carbon monoxide, carbon dioxide, nitrogen oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Blacktop Asphalt Low VOC Sealant?

The signal word is warning.

What is the physical form of Blacktop Asphalt Low VOC Sealant?

Blacktop Asphalt Low VOC Sealant is a solid appearing as paste with black color. It has slight solvent odor.

What is Blacktop Asphalt Low VOC Sealant used for?

Caulking Compound

What are the hazard statements for Blacktop Asphalt Low VOC Sealant?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H332: Harmful if inhaled.
  • H351: Suspected of causing cancer.