Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Landau Top & Trim Adhesive
- Product Code
- 070798002333, 070798002340, 070798002357, 070798002371
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Transportation
1-800-535-5053
Transportation
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Hexane | 110-54-3 | 10 - 30% | Yes |
| Acetone | 67-64-1 | 10 - 30% | Yes |
| Toluene | 108-88-3 | 10 - 30% | Yes |
| Methylcyclopentane | 96-37-7 | 3 - 7% | Yes |
| 3-Methylpentane | 96-14-0 | 3 - 7% | Yes |
| 2-Methylpentane | 107-83-5 | 1 - 5% | Yes |
| Magnesium oxide | 1309-48-4 | 0.5 - 1.5% | No |
The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. NOTE: Only trained personnel should administer artificial respiration or give oxygen.
Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing. DO NOT try to peel the solidified material from the skin or use solvents or thinners to dissolve it. The use of vegetable oil or mineral oil is recommended for removal of this material from the skin. Flush exposed area with water while removing contaminated clothing. Get medical attention if irritation persists. To remove from skin, remove completely with a dry cloth or paper towel, before washing with detergent and water.
If material gets into eyes, flush with water immediately for 15 minutes. Consult a physician.
If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately for inhalation and ingestion. Get medical aid if symptoms persist for skin. Consult a physician for eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.
Use water spray to cool exposed surfaces. Cool fire-exposed containers using water spray.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak.
No Information
Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers.
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Provide adequate ventilation. Avoid heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use in well ventilated area. Open all windows and doors or use other means to ensure cross-ventilation and fresh air entry during application and drying. Odor is not an adequate warning for hazardous conditions. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion. Wash thoroughly after handling. Do not use in areas where static sparks may be generated. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal. Construction and repair activities can adversely affect indoor air quality. Consult with occupants or a representative (i.e. maintenance, building manager, industrial hygienist, or safety officer) to determine ways to minimize impact.
Store away from sources of ignition and heat. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.
Wash thoroughly after handling.
Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Do not use in areas where static sparks may be generated.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Exothermic reactions with strong acids.
Exothermic reaction with strong acids. Strong oxidizers, alkali metals and alkaline earth metals may cause fires or explosions.
Keep away from open flames, hot surfaces and sources of ignition. Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions. Avoid contact with skin, eyes and clothing. Do not smoke.
Open flames, hot surfaces and sources of ignition. Keep away from strong oxidizing agents, heat and open flames. Exothermic reaction with strong acids. Strong oxidizers, alkali metals and alkaline earth metals may cause fires or explosions.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- Adhesives, containing a flammable liquid
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Landau Top & Trim Adhesive?
The signal word is danger.
What is the physical form of Landau Top & Trim Adhesive?
Landau Top & Trim Adhesive is a thick liquid appearing as tan . It has strong solvent odor.
What is Landau Top & Trim Adhesive used for?
Adhesive
What are the hazard statements for Landau Top & Trim Adhesive?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H373: May cause damage to organs through prolonged or repeated exposure.