Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Quick Plug Hydraulic & Anchoring Cement
- Product Code
- 1712801
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Repair Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Transportation
1-800-535-5053
Transportation
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Portland cement | 65997-15-1 | 30 - 60% | Yes |
| Quartz | 14808-60-7 | 10 - 30% | Yes |
| Fused calcium aluminate | 65997-16-2 | 10 - 30% | Yes |
| Calcium sulfate | 7778-18-9 | 1 - 5% | Yes |
| Calcium hydroxide | 1305-62-0 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air.
Wash thoroughly with soap and water.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
Call a physician or Poison Control Center immediately.
Immediate Medical Attention
If continued breathing difficulty is experienced, get medical attention immediately. If skin irritation persists, call a physician. Get medical attention immediately for eye contact. Call a physician or Poison Control Center immediately for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog
Material will not burn.
Use water spray to cool exposed surfaces.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Sweep up excess powder. Place remaining powder into containers.
No Information
Sweep up excess powder. Place remaining powder into containers.
Related Products
Similar products with comparable safety profiles
Quick Plug Hydraulic Cement
---
Quick Plug Hydraulic Cement
---
DAP Strong Anchoring Adhesive Part B Catalyst
---
DAP Strong Anchoring Adhesive Part A Resin
---
Loctite Power Grab Heavy Duty Express
---
Max Strength Heavy Duty Construction Adhesive
---
Loctite Power Grab All Purpose Express
---
DAP Heavy Duty Construction Adhesive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! Keep containers closed when not in use. Avoid contact with skin and eyes. Do not breathe dust. Do not inhale dusts of this product. While dry sanding, use of a NIOSH-approved dust mask is recommended.
Store containers away from excessive heat and freezing.
KEEP OUT OF REACH OF CHILDREN! Avoid contact with skin and eyes.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.
strong bases and oxidizing agents
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Quick Plug Hydraulic & Anchoring Cement?
The signal word is danger.
What is the physical form of Quick Plug Hydraulic & Anchoring Cement?
Quick Plug Hydraulic & Anchoring Cement is a powder appearing as gray with gray color. It has little or no odor.
What is Quick Plug Hydraulic & Anchoring Cement used for?
Repair Compound
What are the hazard statements for Quick Plug Hydraulic & Anchoring Cement?
This substance has 8 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
- H350: May cause cancer.
- H370: Causes damage to organs. Classified Category 1 Substances that produced significant toxicity in humans and evidence to produce significant toxicity with single exposure. Cell death, adverse change in biochemistry, haematology or urinalysis parameters, Central or peripheral nervous system and effects senses. multifocal or diffuse necrosis, fibrosis or granuloma formation in organs.
- H372: Causes damage to organs through prolonged or repeated exposure.