NextSDS Logo
Safety Data Sheet EN

3.0 Concrete & Masonry Self-Leveling Sealant - Gray

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
3.0 Concrete & Masonry Self-Leveling Sealant - Gray
Product Code
070798743441, 070798007642

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535 -5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2
Skin Irrit. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
1,2-Benzenedicarboxylic acid, di-C9-C11-branched 68515-49-1 10 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Leave the area to obtain fresh air.

Symptoms: difficulty in breathing

Skin contact

Wash skin with soap and water for 15 minutes.

Eye contact

Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.

Symptoms: irritation

Ingestion

If swallowed, do not induce vomiting.

Immediate Medical Attention

Get medical attention immediately if continued difficulty in breathing is experienced, if skin symptoms persist, if eye contact occurs, or if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog

Specific hazards

No Information

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.

Environmental

No Information

Cleanup methods

Scrape up dried material and place into containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling.

Storage

Avoid excessive heat and freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
Slight
Vapor Density
Heavier Than Air
Decomposition Temperature
Not Established
Upper Explosive Limit
N.E.
Physical State Data
solid
State Under Standard Conditions
---
Explosive Limits
---
Boiling Point
N.A. Mixture w/o a constant boiling point.
Flash Point
Water - based, does not flash.
Kinematic Viscosity
---
Partition Coefficient
Not Established
Physical State
Solid
Properties Status
---
Appearance
Paste
Freezing Point
Not Established
Colour Intensity
---
Lower Explosive Limit
N.E.
Metal Corrosion
---
Auto Ignition Temperature
Not Established
Ph
Not Applicable
Density
1.53 - 1.54 g/cm3
Melting Point
---
Solubility In Water
Not Established
Voc Content
---
Bulk Density
---
Solubility
---
Form
---
Solubility In Fat
---
Dynamic Viscosity
Not Established
Colour
Gray
Cloud Point
---
Vapor Pressure
Not Established
Molecular Weight
---
Solidification Point
---
Softening Point
---
Evaporation Rate
Slower Than n-Butyl Acetate
Relative Density
---
Flammability
---
Relative Evaporation Rate
---
Crystallisation Point
---
Odor Threshold
Not Established
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Excessive heat and freezing.

Incompatible

strong bases and oxidizing agents.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 3.0 Concrete & Masonry Self-Leveling Sealant - Gray?

The signal word is warning.

What is the physical form of 3.0 Concrete & Masonry Self-Leveling Sealant - Gray?

3.0 Concrete & Masonry Self-Leveling Sealant - Gray is a solid appearing as paste with gray color. It has slight odor.

What is 3.0 Concrete & Masonry Self-Leveling Sealant - Gray used for?

Caulking Compound

What are the hazard statements for 3.0 Concrete & Masonry Self-Leveling Sealant - Gray?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.