NextSDS Logo
Safety Data Sheet EN

DAP Concrete & Mortar Repair

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DAP Concrete & Mortar Repair
Product Code
070798346118

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Spackling Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Carc. Cat. 1A
Eye Irrit. Cat. 2A
Skin Irrit. Cat. 2
STOT RE Cat. 1
STOT SE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H350 May cause cancer.
H370 Causes damage to organs .
H372 Causes damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 P270 Do no eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P311 IF exposed or concerned: Call a POISON CENTER/doctor/...
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Respirable crystalline silica 14808-60-7 15 - 40% Yes
Limestone 1317-65-3 10 - 30% Yes
Perlite 93763-70-3 3 - 7% Yes
Clay 1332-58-7 1 - 5% Yes
Fly ash 68131-74-8 1 - 5% Yes

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Leave the area to obtain fresh air.

Symptoms: difficulty in breathing

Skin contact

Wash skin with soap and water for 15 minutes.

Eye contact

Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.

Symptoms: irritation

Ingestion

If swallowed, do not induce vomiting.

Immediate Medical Attention

Get medical attention immediately if symptoms persist or as directed for specific exposure routes.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

No Information

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No Information

Environmental

No Information

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. Removal of this product after use will result in the generation of Dust. If dry-sanded, exposure to dust may result in the build-up of material in eyes, ears, nose, and mouth which may cause irritation. While dry sanding, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling.

Storage

Avoid excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Odor
Slight
Cloud Point
---
Colour
Gray
Physical State Data
solid
Density
1.43 - 1.44 g/cm3
Form
Paste
Solidification Point
---
Evaporation Rate
Slower Than n-Butyl Acetate
Freezing Point
Not Established
Metal Corrosion
---
Colour Intensity
---
Decomposition Temperature
Not Established
Molecular Weight
---
Flammability
---
Properties Status
---
Appearance
Paste
Vapor Density
Heavier Than Air
Lower Explosive Limit
N.E.
Relative Density
---
Odor Threshold
Not Established
Kinematic Viscosity
---
Solubility In Water
Not Established
Auto Ignition Temperature
Not Established
Boiling Point
N.A. Mixture w/o a constant boiling point.
Solubility In Fat
---
Partition Coefficient
Not Established
Softening Point
---
Solubility
---
Voc Content
---
Ph
Between 7.0 and 12.0
Bulk Density
---
Flash Point
Water - based, does not flash.
Crystallisation Point
---
Relative Evaporation Rate
---
Upper Explosive Limit
N.E.
State Under Standard Conditions
---
Physical State
Solid
Vapor Pressure
Not Established
Dynamic Viscosity
Not Established
Melting Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.

Incompatible

Incompatible with strong bases and oxidizing agents.

Decomposition

Above 1450 degree C: SO2 and CaO.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not Regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DAP Concrete & Mortar Repair?

The signal word is danger.

What is the physical form of DAP Concrete & Mortar Repair?

DAP Concrete & Mortar Repair is a solid appearing as paste with gray color. It has slight odor.

What is DAP Concrete & Mortar Repair used for?

Spackling Compound

What are the hazard statements for DAP Concrete & Mortar Repair?

This substance has 6 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H332: Harmful if inhaled.
  • H350: May cause cancer.
  • H370: Causes damage to organs .
  • H372: Causes damage to organs through prolonged or repeated exposure.