NextSDS Logo
Safety Data Sheet EN

DAP Weatherproof Patching Compound

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DAP Weatherproof Patching Compound
Product Code
1050101

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Spackling Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1A
Eye Irrit. Cat. 2A
Skin Irrit. Cat. 2
STOT RE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H350 May cause cancer.
H372 Causes damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P314 Get medical advice/attention if you feel unwell.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 45 - 70% Yes
Fly ash 68131-74-8 3 - 7% Yes
Soda lime borosilicate glass 65997-17-3 1 - 5% Yes
Perlite 93763-70-3 0.5 - 1.5% Yes
Silica, crystalline 14808-60-7 0.1 - 1% Yes
Titanium dioxide 13463-67-7 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Leave the area to obtain fresh air.

Symptoms: Difficulty in breathing

Skin contact

Wash skin with soap and water for 15 minutes.

Eye contact

Immediately flush eyes with large quantities of water for at least 15 minutes.

Symptoms: Irritation

Ingestion

DO NOT INDUCE VOMITING.

Immediate Medical Attention

Get medical attention immediately if continued difficulty in breathing is experienced, for eye contact, and for ingestion. Get medical aid if skin symptoms persist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Instructions

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear. Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No Information

Cleanup methods

absorb with inert material and dispose of in accordance with applicable regulations

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. If dry-sanded, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling.

Storage

Avoid excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Paste
Colour
White to Off-White
Colour Intensity
---
Form
Paste
Odor
Slight
Odor Threshold
Not Established
Ph
Between 7.0 and 12.0
Melting Point
---
Boiling Point
N.A. Mixture w/o a constant boiling point.
Flash Point
Water - based, does not flash.
Freezing Point
Not Established
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Slower Than n-Butyl Acetate
Vapor Pressure
Not Established
Vapor Density
Heavier Than Air
Relative Density
---
Bulk Density
---
Density
1.44 - 1.56 g/cm3
Flammability
---
Upper Explosive Limit
N.E.
Lower Explosive Limit
N.E.
Explosive Limits
---
Auto Ignition Temperature
Not Established
Decomposition Temperature
Not Established
Solubility
---
Partition Coefficient
Not Established
Solubility In Water
Not Established
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not Established
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.

Incompatible

Incompatible with strong bases and oxidizing agents.

Decomposition

Above 1450 degree C: SO2 and CaO.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DAP Weatherproof Patching Compound?

The signal word is danger.

What is the physical form of DAP Weatherproof Patching Compound?

DAP Weatherproof Patching Compound is a solid appearing as paste with white to off-white color. It has slight odor.

What is DAP Weatherproof Patching Compound used for?

Spackling Compound

What are the hazard statements for DAP Weatherproof Patching Compound?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H350: May cause cancer.
  • H372: Causes damage to organs through prolonged or repeated exposure.