NextSDS Logo
Safety Data Sheet EN

Gorilla Super Glue Ultimate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Gorilla Super Glue Ultimate
Product Form
Mixture
Synonyms
Ethyl Cyanoacrylate Adhesive

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Adhesive for metal, wood, ceramics, leather, paper, most plastics and more

Manufacturers & Suppliers

The Gorilla Glue Company logo

The Gorilla Glue Company

manufacturer

2101 E. Kemper Road, Cincinnati, Ohio 45241

513-271-3300

http://www.gorillatough.com

Emergency Contacts

Emergency Contact

(800) 966-3458

During Business Hours

Emergency Contact

(800) 420-7186

Outside Business Hours

Prosar

1-800-420-7186

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 4 H227
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H227 Combustible liquid.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P210 Keep away from extremely high or low temperatures, ignition sources, and incompatible materials. - No smoking.
P261 Avoid breathing vapors, mist, or spray.
P264 Wash hands, forearms, and other exposed areas thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, protective clothing, and eye protection.
P302 + P352 If on skin: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P370 + P378 In case of fire: Use appropriate media (see section 5) to extinguish.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations.
IF INHALED: Remove person to fresh air and keep at rest in a position comfortable for breathing.
Store in a well-ventilated place. Keep container tightly closed. Keep cool.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethyl cyanoacrylate 7085-85-0 70 - 90% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical advice.

Symptoms: May cause respiratory irritation.

Skin contact

Remove contaminated clothing. Gently wash with plenty of soap and water followed by rinsing with water for at least 15 minutes. Call a POISON CENTER or doctor/physician if you feel unwell. Wash contaminated clothing before reuse.

Symptoms: Causes skin irritation.

Eye contact

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Causes serious eye irritation.

Ingestion

Rinse mouth. Do not induce vomiting. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Ingestion is likely to be harmful or have adverse effects.

Immediate Medical Attention

If medical advice is needed, have product container or label at hand.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical powder, alcohol-resistant foam, carbon dioxide (CO₂).

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Fire Hazard: Not flammable. Explosion Hazard: Product is not explosive. Reactivity: Rapid polymerization occurs upon contact with water or alkaline substances. As a result, heat is generated. Skin inflammation or burns may occur upon contact during this polymerization. May react with strong oxidizers, increasing risk of fire or explosion.

Instructions

Do not allow run-off from fire fighting to enter drains or water courses.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Clean up spills immediately and dispose of waste safely. Use only non-sparking tools.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety procedures.

Storage

Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Store away from heat and incompatible materials. Protect from moisture.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Clear
Colour
---
Colour Intensity
---
Form
---
Odor
Sharp, irritating
Odor Threshold
Not available
Ph
Not applicable
Melting Point
Not available
Boiling Point
54 - 56 °C (129.2 – 132.8 °F)
Flash Point
80 °C (176 °F)
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available
Vapor Pressure
Not available
Vapor Density
---
Relative Density
Not determined
Bulk Density
---
Density
0.889 g/cm³ (7.419 lbs/gal)
Flammability
Not available
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not miscible or difficult to mix.
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
< 20 g/l estimated (California SCAQMD Method 316B)
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

Rapid polymerization occurs upon contact with water or alkaline substances. As a result, heat is generated. Skin inflammation or burns may occur upon contact during this polymerization. May react with strong oxidizers, increasing risk of fire or explosion.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight. Extremely high or low temperatures.

Incompatible

Strong acids, strong bases, strong oxidizers. Water.

Decomposition

Carbon Oxides (CO and CO₂) and other irritating compounds.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Gorilla Super Glue Ultimate known by?

Gorilla Super Glue Ultimate is also known as: Ethyl Cyanoacrylate Adhesive

What is the hazard signal word for Gorilla Super Glue Ultimate?

The signal word is warning.

What is the physical form of Gorilla Super Glue Ultimate?

Gorilla Super Glue Ultimate is a liquid appearing as clear . It has sharp, irritating odor.

What is the solubility of Gorilla Super Glue Ultimate?

Not miscible or difficult to mix.

What is Gorilla Super Glue Ultimate used for?

Adhesive for metal, wood, ceramics, leather, paper, most plastics and more

What are the hazard statements for Gorilla Super Glue Ultimate?

This substance has 4 hazard statements:

  • H227: Combustible liquid.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

What is the melting point of Gorilla Super Glue Ultimate?

The melting point is Not available and the boiling point is 54 - 56 °C (129.2 – 132.8 °F).