White Gorilla Glue

Using proper respiratory protection, immediately move the exposed person to fresh air. Seek medical attention immediately.

Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Harmful if inhaled.

Remove contaminated clothing. Gently wash with plenty of soap and water followed by rinsing with water for at least 15 minutes. Call a POISON CENTER or doctor/physician if you feel unwell. Wash contaminated clothing before reuse.

Symptoms: Exposure may produce an allergic reaction. Causes skin irritation.

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Causes eye irritation.

Rinse mouth. Do not induce vomiting. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Ingestion is likely to be harmful or have adverse effects.

Carbon dioxide, dry powder, and foam. In cases of large scale fires, alcohol-resistant foams are preferred. If water is used, it should be used in very large quantities. The reaction between water and isocyanate may be vigorous.

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Not flammable. Product is not explosive. Exothermic reactions with amines and alcohols; reacts with water forming heat, carbon dioxide, and insoluble polyurea. The combined effect of CO2 and heat can produce enough pressure to rupture a closed container.

Do not allow run-off from fire fighting to enter drains or water courses.

Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Prevent entry to sewers and public waters.

Remove mechanically; cover remainders with wet absorbent material (e. g. sand, earth, sawdust). After approx. 15 min. transfer to waste container and do not seal (evolution of CO₂). Keep damp in a safe ventilated area for several days. Clean up spills immediately and dispose of waste safely.

Materials: wet absorbent material (e. g. sand, earth, sawdust)

Handle in accordance with good industrial hygiene and safety procedures.

Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Store away from incompatible materials. Keep product away from sources of alcohols, amines, or other materials that react with isocyanates. Keep out of reach of children and animals.

Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work.

Stable under recommended handling and storage conditions (see section 7).

Exothermic reactions with amines and alcohols; reacts with water forming heat, carbon dioxide, and insoluble polyurea. The combined effect of $\mathrm{CO}_{2}$ and heat can produce enough pressure to rupture a closed container.

Contact with moisture, other materials that react with isocyanates, or temperatures above $350^{\circ}\mathrm{F}$ (177°C) may cause polymerization.

Direct sunlight. Extremely high or low temperatures.

Strong acids, strong bases, strong oxidizers. Acids. Alcohols. Water, Copper Alloys.

Carbon oxides $(\mathrm{CO}, \mathrm{CO}_2)$ . Nitrogen compounds. Isocyanates. Dense black smoke.