Original Gorilla Glue

Using proper respiratory protection, immediately move the exposed person to fresh air. Seek medical attention immediately.

Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation.

Remove contaminated clothing. Gently wash with plenty of soap and water followed by rinsing with water for at least 15 minutes. Call a POISON CENTER or doctor/physician if you feel unwell. Wash contaminated clothing before reuse.

Symptoms: Causes skin irritation. Exposure may produce an allergic reaction.

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Causes eye irritation.

Rinse mouth. Do not induce vomiting. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Ingestion is likely to be harmful or have adverse effects. May cause gastro-intestinal blockage if swallowed.

Carbon dioxide, dry powder, and foam. In cases of large scale fires, alcohol-resistant foams are preferred. If water is used, it should be used in very large quantities. The reaction between water and isocyanate may be vigorous.

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Exothermic reaction with amines and alcohols; reacts with water forming heat, CO2, and insoluble polyurea. The combined effect of CO2 and heat can produce enough pressure to rupture a closed container.

Do not allow run-off from fire fighting to enter drains or water courses.

Evacuate unnecessary personnel. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Prevent entry to sewers and public waters.

Remove mechanically; cover remainders with wet absorbent material (e. g. sand, earth, sawdust). After approx. 15 min. transfer to waste container and do not seal (evolution of CO₂). Keep damp in a safe ventilated area for several days. Clean up spills immediately and dispose of waste safely.

Materials: wet absorbent material (e. g. sand, earth, sawdust)

Do not breathe vapors, mists, or dusts. Use adequate ventilation to keep airborne isocyanate levels below the exposure limits. Wear respiratory protection if material is heated, sprayed, used in a confined space, or if the exposure limit is exceeded. Avoid contact with skin and eyes. Wear appropriate eye and skin protection. Wash thoroughly after handling. Do not breathe smoke and gases created by overheating or burning this material.

Store in a dry, cool and well-ventilated place. Store away from incompatible materials. Keep product away from sources of alcohols, amines, or other materials that react with isocyanates. Keep out of reach of children and animals. Store in tightly closed containers to prevent moisture contamination. Do not reseal if contamination is suspected.

Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work.

Stable under recommended handling and storage conditions (see section 7).

Exothermic reaction with amines and alcohols; reacts with water forming heat, $\mathrm{CO}_{2}$, and insoluble polyurea. The combined effect of $\mathrm{CO}_{2}$ and heat can produce enough pressure to rupture a closed container.

Contact with moisture, other materials that react with isocyanates, or temperatures above $350^{\circ}\mathrm{F}$ $(177^{\circ}\mathrm{C})$ may cause polymerization.

Direct sunlight. Extremely high or low temperatures.

Strong acids, strong bases, strong oxidizers. Alcohols. Copper and its alloys. Amines. Water.

Carbon oxides (CO, CO₂). Nitrogen compounds. Isocyanates. Fire will produce dense black smoke.