Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA
- Product Code
- 597979
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium tetraborate pentahydrate | 12179-04-3 | 30 - 60% | Yes |
| Sodium stearate | 822-16-2 | 10 - 30% | Yes |
| Sodium metasilicate 5H2O | 10213-79-3 | 1 - 5% | Yes |
| Sodium nitrite | 7632-00-0 | 1 - 5% | Yes |
| Calcium distearate | 1592-23-0 | 5 - 10% | Yes |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available).
Immediately flush eyes with plenty of water for at least 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
If symptoms develop and persist, get medical attention.
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721
---
BONDERITE L-FM F 750 STAMPING LUBRICANT ACHESON known as MULTAN F 750
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing dust. For industrial use only. Do not take internally. Wash thoroughly after handling.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid ignition sources where dust is produced.
This product may react with oxidizing agents. Nitrites may react with organic amines to form nitrosamines which can cause cancer.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3253
- Shipping Name
- Disodium trioxosilicate mixture
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA?
The signal word is warning.
What is the physical form of BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA?
BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA is a powder with yellow color. It has mild odor.
What is the solubility of BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA?
Appreciable Water
What is BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA used for?
Lubricant
What are the hazard statements for BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA?
The melting point is Not determined and the boiling point is Not determined.