Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), solvent-refined heavy paraffinic | 64741-88-4 | 5 - 10% | Yes |
| Mineral oil~ | --- | 1 - 5% | Yes |
| Sulfonic acids, petroleum, calcium salts | 61789-86-4 | 1 - 5% | Yes |
| Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts | 70024-69-0 | 0.1 - 1% | Yes |
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 30 - 60% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist. Seek immediate medical attention for eye contact and ingestion.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721
---
BONDERITE L-FM F 750 STAMPING LUBRICANT ACHESON known as MULTAN F 750
---
BONDERITE L-FM F 738 FORMING LUBRICANT ACHESON known as MULTAN F 738
---
BONDERITE L-FM 12MA STAMPING LUBRICANT ACHESON known as LUBE 12-MA
---
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404?
The signal word is warning.
What is the physical form of BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404?
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404 is a liquid with amber color. It has petroleum odor.
What is the solubility of BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404?
Not miscible Water
What is BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404 used for?
Lubricant
What are the hazard statements for BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F) calculated.