Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty
- Product Code
- 702269
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy resin
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicon carbide | 409-21-2 | 30 - 60% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 30 - 60% | Yes |
| Aluminium oxide - non fibrous form | 1344-28-1 | 5 - 10% | Yes |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | Yes |
| Cristobalite, (RCS >=1% - <10%) | 14464-46-1 | 0.1 - 1% | Yes |
| Carbon black | 1333-86-4 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. If symptoms develop and persist, get medical attention.
Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE PC 7222 known as Fixmaster Wear Resist Putty
---
LOCTITE PC 235642 A RESIN known as Fixmaster Steel Putty RESIN
---
LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty
---
LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB
---
LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER
---
LOCTITE PC 7222 Part A
---
LOCTITE PC 7257 known as LOCTITE FIX MAGNACRETE SS
---
LOCTITE PC 9410 AGGREGATE known as Fixmaster® Magna-Crete® 95551
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Store in original container until ready to use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.
Acids. Bases. Oxidizing agents. Amines.
Oxides of carbon. Oxides of nitrogen. Phenolics. Formaldehyde Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty?
The signal word is warning.
What is the physical form of LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty?
LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty is a solid with gray / grey color. It has odourless / odorless odor.
What is the solubility of LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty?
Insoluble Water
What is LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty used for?
Epoxy resin
What are the hazard statements for LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
What is the melting point of LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty?
The melting point is > 100 °C (> 212°F) and the boiling point is > 200 °C (> 392°F).