Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty
- Product Code
- 97423_374000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyurethane hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Di(2-ethylhexyl)phthalate | 117-81-7 | 60 - 80% | Yes |
| diethylmethylbenzenediamine | 68479-98-1 | 30 - 60% | Yes |
| Carbon black | 1333-86-4 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Remove all sources of ignition. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal. Flush area with water to remove trace residue.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE SF 8220 known as LOCTITE FIXMASTER FLEX CLEANER
---
LOCTITE PC 7222 known as Fixmaster Wear Resist Putty
---
LOCTITE PC 7222 known as Fixmaster Wear Resistant Putty
---
LOCTITE PC 235642 A RESIN known as Fixmaster Steel Putty RESIN
---
LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB
---
LOCTITE PC FLEX80 453GR PART B
---
LOCTITE PC 9410 AGGREGATE known as Fixmaster® Magna-Crete® 95551
---
LOCTITE PC 7257 B known as LOCTITE FIXMAST MAGROUT 5GA PTB
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not taste or swallow. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Store away from heat, sparks, flames, or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Acids. Oxidizing agents.
Oxides of carbon. Oxides of sulfur. Hydrogen sulfide. Cyanides. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty?
The signal word is danger.
What is the physical form of LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty?
LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty is a liquid, low viscosity with blackblack color. It has aromaticaromatic odor.
What is the solubility of LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty?
Partially soluble Water
What is LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty used for?
Polyurethane hardener
What are the hazard statements for LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H351: SUSPECTED OF CAUSING CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE MR FLX 80 known as Loctite Fixmaster Flex 80 Putty?
The melting point is Not available. and the boiling point is Not available..