Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-NT 770X R N CONVERSION COATING
- Product Code
- 595265
- Synonyms
- BONDERITE 770X REPL N
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| calcium chloride | 10043-52-4 | 30 - 60% | Yes |
| Calcium dihydroxide | 1305-62-0 | 10 - 30% | Yes |
| Sodium hydroxide | 1310-73-2 | 10 - 30% | Yes |
IDH number: 595265 Product name: BONDERITE M-NT 770X R N CONVERSION COATING known as BONDERITE 770X REPL N
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. Seek immediate medical attention. Remove contaminated clothing and footwear.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye, ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not a fire hazard.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal. Wash spill area thoroughly.
Related Products
Similar products with comparable safety profiles
BONDERITE M-NT 1200 R20 CONVERSION COATING
---
BONDERITE M-NT 1455 CR FREE CONVERSION COATING known as BONDERITE 1455
---
BONDERITE M-NT 5700 WIPES CONVERSION COATING
---
BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU
---
BONDERITE M-NT 5700 CR FREE CONVERSION COATING known as ALODINE 5700
---
BONDERITE M-NT 1820 R2
---
BONDERITE M-NT 1800 R27 NON CHROME COATING
---
BONDERITE M-NT 601
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing dust. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Excessive heat.
Reacts with acids.
None expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1823
- Shipping Name
- Sodium hydroxide, solid mixture
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-NT 770X R N CONVERSION COATING known by?
BONDERITE M-NT 770X R N CONVERSION COATING is also known as: BONDERITE 770X REPL N
What is the hazard signal word for BONDERITE M-NT 770X R N CONVERSION COATING?
The signal word is danger.
What is the physical form of BONDERITE M-NT 770X R N CONVERSION COATING?
BONDERITE M-NT 770X R N CONVERSION COATING is a solid with white color.
What is BONDERITE M-NT 770X R N CONVERSION COATING used for?
Conversion coating
What are the hazard statements for BONDERITE M-NT 770X R N CONVERSION COATING?
This substance has 2 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-NT 770X R N CONVERSION COATING?
The melting point is Not determined and the boiling point is Not applicable.