NextSDS Logo
Safety Data Sheet EN

AQUENCE AV 117A known as ADHESIN 117A

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AQUENCE AV 117A known as ADHESIN 117A
Product Code
1218351

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Adhesive

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Precautionary Statements

Not prescribed
Not prescribed
Not prescribed
Not prescribed

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Wash affected area immediately with soap and water. Remove contaminated clothing and footwear.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

If symptoms develop and persist, get medical attention. If material is ingested, immediately contact a physician or poison control center.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures appropriate to local circumstances and the surrounding environment.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

Keep unnecessary personnel away.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Small spill

Small spills can be absorbed with vermiculite, clay or other suitable non-biodegradable absorbent material, scooped up and placed in containers.

Large spill

For large spills dike ahead and collect liquid.

Environmental

Prevent further leakage or spillage if safe to do so. Do not empty into drains / surface water / ground water.

Cleanup methods

Small spills can be absorbed with vermiculite, clay or other suitable non-biodegradable absorbent material, scooped up and placed in containers. For large spills dike ahead and collect liquid.

Materials: vermiculite, clay or other suitable non-biodegradable absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash thoroughly after handling. Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Do not taste or swallow. Keep container closed. Do not breathe gas/fumes/vapor/spray.

Storage

Store between 1 °C (33.8 °F) and 37 °C (98.6 °F). Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing, freezing temperature is <=32F (<=0C).

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use local exhaust ventilation if the potential for airborne exposure exists.

Hands

Use chemical resistant, impervious gloves

Eyes

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

Respiratory

Use a NIOSH approved respirator if ventilation is inadequate. Observe OSHA regulations for respirator use (29 CFR 1910.134).

Skin/Body

Use chemical resistant, impervious clothing to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Density
1.05
State Under Standard Conditions
---
Odor Threshold
Not available.
Odor
Mild
Colour
White
Vapor Pressure
Not determined
Auto Ignition Temperature
Not applicable
Relative Evaporation Rate
---
Ph
Not available.
Form
---
Solubility In Water
---
Softening Point
---
Solidification Point
---
Physical State
Liquid
Colour Intensity
---
Partition Coefficient
Not determined
Molecular Weight
---
Physical State Data
liquid
Appearance
---
Evaporation Rate
Not determined
Voc Content
Not available.
Dynamic Viscosity
Not available.
Cloud Point
---
Crystallisation Point
---
Flash Point
No flash point up to 100°C. Aqueous preparation.
Solubility
Soluble Water
Upper Explosive Limit
Not available.
Relative Density
---
Bulk Density
---
Boiling Point
100.0 °C (212°F) Approximately
Solubility In Fat
---
Metal Corrosion
---
Kinematic Viscosity
Not available.
Melting Point
< 5 °C (< 41°F) (Freezing point)
Flammability
Not applicable
Explosive Limits
---
Lower Explosive Limit
Not available.
Vapor Density
---
Decomposition Temperature
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Freezing conditions.

Incompatible

Avoid contact with materials that are water reactive.

Decomposition

Oxides of carbon. Thermal decomposition can lead to release of irritating gases and vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
Environmentally hazardous substance, liquid, n.o.s. (reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7]and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6])
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AQUENCE AV 117A known as ADHESIN 117A?

The signal word is no signal word.

What is the physical form of AQUENCE AV 117A known as ADHESIN 117A?

AQUENCE AV 117A known as ADHESIN 117A is a liquid with white color. It has mild odor.

What is the solubility of AQUENCE AV 117A known as ADHESIN 117A?

Soluble Water

What is AQUENCE AV 117A known as ADHESIN 117A used for?

Adhesive

What is the melting point of AQUENCE AV 117A known as ADHESIN 117A?

The melting point is < 5 °C (< 41°F) (Freezing point) and the boiling point is 100.0 °C (212°F) Approximately.