NextSDS Logo
Safety Data Sheet EN

AQUENCE PS 4570 NACOR

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AQUENCE PS 4570 NACOR
Product Code
2669157

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

The data for this section has not been processed yet.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms develop and persist, get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If material is ingested, immediately contact a physician or poison control center.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures appropriate to local circumstances and the surrounding environment.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Small spill

Small spills can be absorbed with vermiculite, clay or other suitable non-biodegradable absorbent material, scooped up and placed in containers.

Large spill

For large spills dike ahead and collect liquid.

Environmental

Prevent further leakage or spillage if safe to do so. Do not empty into drains / surface water / ground water.

Cleanup methods

Keep unnecessary personnel away. Ensure adequate ventilation. Wear appropriate protective equipment and clothing during clean-up. Small spills can be absorbed with vermiculite, clay or other suitable non-biodegradable absorbent material, scooped up and placed in containers. For large spills dike ahead and collect liquid.

Materials: vermiculite, clay or other suitable non-biodegradable absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.

Storage

For safe storage, store at or above 5 °C (41°F). Protect from freezing. Keep the container tightly closed and in a cool, well-ventilated place.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.

Hands

Use impermeable gloves

Eyes

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

Respiratory

If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided. Observe OSHA regulations for respirator use (29 CFR 1910.134).

Skin/Body

protective clothing as necessary to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State Data
liquid
Solubility In Water
---
Partition Coefficient
Not determined
Evaporation Rate
Not determined
Bulk Density
---
Relative Density
1.00
Ph
6
Freezing Point
---
Relative Evaporation Rate
---
Solidification Point
---
Melting Point
0 °C (32°F) Approximately
Appearance
---
Colour
White
Cloud Point
---
Form
---
Dynamic Viscosity
Not available.
Solubility In Fat
---
Kinematic Viscosity
Not available.
State Under Standard Conditions
---
Flammability
Not applicable
Physical State
Liquid
Vapor Pressure
Not determined
Crystallisation Point
---
Softening Point
---
Vapor Density
---
Density
---
Molecular Weight
---
Upper Explosive Limit
Not available.
Properties Status
---
Auto Ignition Temperature
Not applicable
Boiling Point
100 °C (212°F) Approximately
Odor Threshold
Not available.
Voc Content
0.00 %
Colour Intensity
---
Odor
Sweet
Metal Corrosion
---
Flash Point
> 212 °C (> 413.6 °F) Setaflash Closed Cup
Solubility
Dispersible Water
Decomposition Temperature
Not available.
Explosive Limits
---
Lower Explosive Limit
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Do not freeze.

Incompatible

Contact with water reactive materials (such as oleum) can cause exothermic reactions.

Decomposition

Oxides of carbon. Thermal decomposition can lead to release of irritating gases and vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AQUENCE PS 4570 NACOR?

The signal word is warning.

What is the physical form of AQUENCE PS 4570 NACOR?

AQUENCE PS 4570 NACOR is a liquid with white color. It has sweet odor.

What is the solubility of AQUENCE PS 4570 NACOR?

Dispersible Water

What are the hazard statements for AQUENCE PS 4570 NACOR?

This substance has 1 hazard statement:

  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of AQUENCE PS 4570 NACOR?

The melting point is 0 °C (32°F) Approximately and the boiling point is 100 °C (212°F) Approximately.