Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND LCM 1000AF
- Product Code
- 2663672 / 46823
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, amorphous, naturally | 60676-86-0 | 60 - 80% | Yes |
| Silicon dioxide | 7631-86-9 | 10 - 30% | Yes |
| Triglycidyl-p-aminophenol | 5026-74-4 | 1 - 5% | Yes |
| Fatty acids, C18-unsatd., dimers, polymers with epichlorohydrin | 68475-94-5 | 1 - 5% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
| 2,2'-(Phenylene)bis[oxirane] | 30424-08-9 | 1 - 5% | Yes |
| Polyoxyalkylenes amine phosphate | --- | 1 - 5% | Yes |
| 6-glycidyloxynapht-1-yl oxymethyloxirane | 27610-48-6 | 0.1 - 1% | Yes |
| 2,2'-[(2-(oxiranylmethoxy)-1,3-phenylene]bis(methylene)]bisoxirane | 13561-08-5 | 0.1 - 1% | Yes |
| Carbon black | 1333-86-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Avoid using a direct stream of water.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. If mixed with air in sufficient amounts and proportions, organic dusts can form flammable or explosive dust/air mixtures. Reacts with water or steam to form methyltetrahydrophthalic acid and methylhexahydrophthalic acid.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Sweep up spilled material and place in a closed container for disposal.
Materials: closed container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing dust. Avoid any condition that will suspend or float powder particles in the air creating a dust cloud. Reduce all potential of static electrical discharge through bonding and grounding. Wash thoroughly after handling. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use. Electrostatic charge may build-up during handling. Grounding of equipment is recommended.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
High temperatures. Exposure to moisture. Heat, flames, sparks and other sources of ignition. Protect from direct sunlight. Avoid dust formation. High concentration of airborne dust may form explosive mixture with air. Avoid static discharge. Store away from incompatible materials.
Strong oxidizing agents. Strong acids. Bases. Hydrogen fluoride. Caustics. Amines. Avoid contact with water.
Oxides of carbon. Hydrocarbons. Phenolics. Oxides of nitrogen. Ammonia. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ECCOBOND LCM 1000AF?
The signal word is warning.
What is the physical form of LOCTITE ECCOBOND LCM 1000AF?
LOCTITE ECCOBOND LCM 1000AF is a liquid or paste with black color. It has mild odor.
What is LOCTITE ECCOBOND LCM 1000AF used for?
Epoxy adhesive
What are the hazard statements for LOCTITE ECCOBOND LCM 1000AF?
This substance has 6 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H351: SUSPECTED OF CAUSING CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE ECCOBOND LCM 1000AF?
The melting point is Not applicable, Product is a liquid and the boiling point is Not available..