Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 2626 UNDERBODY COATING
- Product Code
- 2703985
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Underbody coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 10 - 30% | No |
| Destillates (Petroleum), Hydrocarbon aliph dearomat <0.1% benzene | 64742-47-8 | 1 - 5% | No |
| Limestone | 1317-65-3 | 1 - 5% | No |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 1 - 5% | No |
| Hexane, 1,6-diisocyanato-, homopolymer, Me Et ketone oxime-blocked | 85940-94-9 | 0.1 - 1% | No |
| Sodium dodecyl sulphate | 151-21-3 | 0.1 - 1% | No |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | No |
| 4-nonylphenol, branched | 84852-15-3 | 0.1 - 1% | No |
IDH number: 2703985 Product name: TEROSON PV 2626 UNDERBODY COATING
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
None expected.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON PV 3838 UNDERBODY COATING TO1119KG
---
TEROSON PV 1035.1 PAINT SHOP SEALANT known as TEROLAN 1035.1
---
TEROSON PV 1095 C PAINT SHOP SEALANT known as TEROLAN SA-1095C
---
TEROSON PV 1099W PA26KG
---
TEROSON PV 11-338.3 TG BOX
---
BONDERITE M-NT 1200 R20 CONVERSION COATING
---
BONDERITE M-NT 600SW CONVERSION COATING PA18KG AU
---
INSULCOAT 1260-RFL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Store between 10 °C (50°F) and 30 °C (86°F). Keep away from heat and direct sunlight. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PV 2626 UNDERBODY COATING?
The signal word is warning.
What is the physical form of TEROSON PV 2626 UNDERBODY COATING?
TEROSON PV 2626 UNDERBODY COATING is a liquid with gray color. It has mild odor.
What is TEROSON PV 2626 UNDERBODY COATING used for?
Underbody coating
What are the hazard statements for TEROSON PV 2626 UNDERBODY COATING?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of TEROSON PV 2626 UNDERBODY COATING?
The melting point is Not applicable and the boiling point is Not applicable.