NextSDS Logo
Safety Data Sheet EN

TEROSON PV 1030.3D W PAINT SHOP SEALANT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON PV 1030.3D W PAINT SHOP SEALANT
Product Form
PVC-sealant
Product Code
599002
Synonyms
TEROLAN 1030.3D W

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Carc. Cat. 1A

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 20 - 30% No
Limestone 1317-65-3 10 - 20% No
Polyvinyl chloride 9002-86-2 10 - 20% No
Talc 14807-96-6 5 - 10% No
Hydrotreated heavy naphtha 64742-48-9 1 - 5% No
Benzoic acid, C9-11-branched alkyl esters 131298-44-7 1 - 5% No
Calcium oxide 1305-78-8 1 - 5% No
Fatty acids, C8-18 and C18-unsatd. 67701-05-7 1 - 5% No
Disononyl phthalate 28553-12-0 0.1 - 1% No
Sodium dodecyl sulphate 151-21-3 0.1 - 1% No
Quartz (SiO2) 14808-60-7 0.1 - 1% No

IDH number: 599002 Product name: TEROSON PV 1030.3D W PAINT SHOP SEALANT known as TEROLAN 1030.3D W

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

This product is combustible at high temperatures.

Instructions

Wear self-contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Provide adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Do not handle or store near an open flame, heat or other sources of ignition. Keep away from heat and direct sunlight.

Hygiene

Wash thoroughly after handling.

Fire prevention

Do not handle or store near an open flame, heat or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid, Paste
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Dark grey
Colour Intensity
---
Form
---
Odor
Mild
Odor Threshold
Not available.
Ph
Not available.
Melting Point
Not available.
Boiling Point
104 °C (219.2 °F)calculated
Flash Point
104 °C (219.2 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not determined
Vapor Density
Not available.
Relative Density
1.53 at 25 °C (77°F)
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not available.
Solubility In Water
practically insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
< 0.15 lb/gal EPA Method 24
Metal Corrosion
---
Dynamic Viscosity
910,000 mPa.s
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat, flames, sparks and other sources of ignition.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Heat and processing may result in the release of low levels of vinyl chloride. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is TEROSON PV 1030.3D W PAINT SHOP SEALANT known by?

TEROSON PV 1030.3D W PAINT SHOP SEALANT is also known as: TEROLAN 1030.3D W

What is the hazard signal word for TEROSON PV 1030.3D W PAINT SHOP SEALANT?

The signal word is danger.

What is the physical form of TEROSON PV 1030.3D W PAINT SHOP SEALANT?

TEROSON PV 1030.3D W PAINT SHOP SEALANT is a solid, paste with dark grey color. It has mild odor.

What are the hazard statements for TEROSON PV 1030.3D W PAINT SHOP SEALANT?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON PV 1030.3D W PAINT SHOP SEALANT?

The melting point is Not available. and the boiling point is 104 °C (219.2 °F)calculated.