NextSDS Logo
Safety Data Sheet EN

TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V
Product Code
853660

Regulatory Identifiers

CAS Number
N/A

Identified Uses

PVC-sealant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Carc. Cat. 1A

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 10 - 30% No
Limestone 1317-65-3 10 - 30% No
Polyvinyl chloride 9002-86-2 10 - 30% No
Hydrotreated heavy naphtha 64742-48-9 1 - 5% No
Fatty acids, C8-18 and C18-unsatd. 67701-05-7 1 - 5% No
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 0.1 - 1% No
Titanium dioxide 13463-67-7 0.1 - 1% No

IDH number: 853660; Product name: TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

In case of fire toxic gases can be released.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat and direct sunlight.

Hygiene

Wash thoroughly after handling.

Fire prevention

Remove all sources of ignition. Keep away from heat.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Dynamic Viscosity
176,400 mPa.s
Appearance
---
Upper Explosive Limit
Not available.
Relative Evaporation Rate
---
Kinematic Viscosity
---
Explosive Limits
---
Physical State
Paste
Solubility In Fat
---
Molecular Weight
---
Relative Density
1.5
Crystallisation Point
---
Physical State Data
liquid
Flammability
Not applicable
Odor
Mild
Freezing Point
---
Vapor Pressure
Not applicable
Properties Status
---
Flash Point
105 °C (221°F) calculated
Form
---
Solidification Point
---
Softening Point
---
Partition Coefficient
Not available.
State Under Standard Conditions
---
Ph
Not applicable
Vapor Density
Not determined
Voc Content
0.1 lb/gal EPA Method 24
Solubility
---
Metal Corrosion
---
Density
---
Evaporation Rate
Not determined
Colour Intensity
---
Auto Ignition Temperature
Not applicable
Odor Threshold
Not available.
Bulk Density
---
Colour
White
Lower Explosive Limit
Not available.
Solubility In Water
practically insoluble
Boiling Point
Not available.
Melting Point
Not available.
Decomposition Temperature
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat, flames, sparks and other sources of ignition.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Heat and processing may result in the release of low levels of vinyl chloride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V?

The signal word is danger.

What is the physical form of TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V?

TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V is a paste with white color. It has mild odor.

What is TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V used for?

PVC-sealant

What are the hazard statements for TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V?

This substance has 2 hazard statements:

  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V?

The melting point is Not available. and the boiling point is Not available..