Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 1095 PAINT SHOP SEALANT
- Product Code
- 621418
- Synonyms
- TEROLAN SA-1095
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 30% | No |
| Calcium carbonate | 471-34-1 | 10 - 30% | No |
| Polyvinyl chloride | 9002-86-2 | 10 - 30% | No |
| Naphtha (petroleum), hydrotreated heavy | 64742-48-9 | 1 - 5% | No |
IDH number: 621418 Product name: TEROSON PV 1095 PAINT SHOP SEALANT known as TEROLAN SA-1095 Page 2 of 7
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air.
Immediately flush skin with plenty of water (using soap, if available).
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
None identified.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON PV 1185 A PAINT SHOP SEALANT
---
TEROSON PV 1030.3D W PAINT SHOP SEALANT
---
TEROSON PV 1095 C PAINT SHOP SEALANT known as TEROLAN SA-1095C
---
TEROSON PV 1095 V PAINT SHOP SEALANT known as TEROLAN SA-1095-V
---
TEROSON PV 1035.1 PAINT SHOP SEALANT known as TEROLAN 1035.1
---
TEROSON PV 1030 3D PAINT SHOP SEALANT known as TEROLAN 1030.3D
---
TEROSON PV 4600 BODY SHOP METAL SEALANT known as TEROSTAT 4600 MS-CD 473H P Sealant
---
TEROSON PV 1550 ACD known as Sealant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Provide adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep out of direct sunlight. Remove all sources of ignition. Store between 10 °C (50°F) and 30 °C (86°F).
Wash thoroughly after handling.
Remove all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Heat and processing may result in the release of low levels of vinyl chloride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TEROSON PV 1095 PAINT SHOP SEALANT known by?
TEROSON PV 1095 PAINT SHOP SEALANT is also known as: TEROLAN SA-1095
What is the hazard signal word for TEROSON PV 1095 PAINT SHOP SEALANT?
The signal word is danger.
What is the physical form of TEROSON PV 1095 PAINT SHOP SEALANT?
TEROSON PV 1095 PAINT SHOP SEALANT is a liquid with white color. It has mild odor.
What is TEROSON PV 1095 PAINT SHOP SEALANT used for?
Sealant
What are the hazard statements for TEROSON PV 1095 PAINT SHOP SEALANT?
This substance has 3 hazard statements:
- H318: CAUSES SERIOUS EYE DAMAGE.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON PV 1095 PAINT SHOP SEALANT?
The melting point is Not available. and the boiling point is 135 °C (275°F).