NextSDS Logo
Safety Data Sheet EN

LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT
Product Code
397690, EE4215-B30

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Part A of 2-K-Epoxy Adhesive

Uses advised against

None identified

Manufacturers & Suppliers

Henkel logo

Henkel

manufacturer

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

CHEMTREC

1-703-527-3887

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
STOT RE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314 Get medical attention if you feel unwell.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 30 - 60% Yes
Kaolin 1332-58-7 1 - 5% Yes
Aluminium oxide - non fibrous form 1344-28-1 0.1 - 1% Yes
Glycerol 56-81-5 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice. Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.

Skin contact

Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated. Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Immediate Medical Attention

Seek immediate medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Avoid moisture.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat, spark and flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
---
Colour Intensity
---
Explosive Limits
---
Solidification Point
---
Kinematic Viscosity
> 30 mm2/s
Metal Corrosion
---
Relative Density
1.6
Relative Evaporation Rate
---
Vapor Pressure
2.0 mm hg < 3 hPa (20 °C (68°F))
Freezing Point
---
Density
---
Upper Explosive Limit
Not available.
Boiling Point
> 150 °C (> 302°F)1,013 hPaNot available.
Lower Explosive Limit
Not available.
Colour
Black
Physical State Data
liquid
Melting Point
Not applicable, Product is a liquid
Flammability
Not applicable
Voc Content
0 %; 0 g/l Estimated
Evaporation Rate
< 1.0
Appearance
---
Physical State
Liquid
Auto Ignition Temperature
Not available.
Form
---
Bulk Density
---
Solubility In Fat
---
Decomposition Temperature
> 140 °C
State Under Standard Conditions
---
Partition Coefficient
Not available.
Softening Point
---
Crystallisation Point
---
Dynamic Viscosity
70,000 - 100,000 cp
Ph
Not applicable, Product is non-soluble (in water).
Odor
Aromatic
Molecular Weight
---
Flash Point
248.9 °C (480.02 °F) Closed cup
Solubility
Not miscible or difficult to mix Water; Partially miscible ketones
Properties Status
---
Vapor Density
---
Odor Threshold
Not available.
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.

Incompatible

Oxidizing agents. Acids. Bases. Amines. Strong oxidizing agents. Strong acids and strong bases. Amines.

Decomposition

Oxides of carbon. Phenolics. Toxic fumes. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
Environmentally hazardous substance, liquid, n.o.s. (Bisphenol-A Epichlorhydrin resin)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT?

The signal word is danger.

What is the physical form of LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT?

LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT is a liquid with black color. It has aromatic odor.

What is the solubility of LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT?

Not miscible or difficult to mix Water; Partially miscible ketones

What is LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT used for?

Part A of 2-K-Epoxy Adhesive

What are the hazard statements for LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT?

This substance has 4 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of LOCTITE STYCAST EE 4215 known as HYSOL EE4215 QT?

The melting point is Not applicable, Product is a liquid and the boiling point is > 150 °C (> 302°F)1,013 hPaNot available..