Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721
- Product Code
- 594512
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Rinse immediately with plenty of water.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM F 750 STAMPING LUBRICANT ACHESON known as MULTAN F 750
---
BONDERITE L-FM PL 633 STAMPING LUBRICANT ACHESON known as MULTAN PL 633
---
BONDERITE L-FM F B27MC6A STAMPING LUBRICANT ACHESON known as MULTAN F B2 7MC6A 9
---
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PRELUBE MP-404
---
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404
---
BONDERITE L-FM PL 298 STAMPING LUBRICANT ACHESON known as MULTAN PL 298
---
BONDERITE L-FM PL 1453 ACHESON STAMPING LUBRICANT known as MULTAN PL 1453
---
BONDERITE L-FM F 747 STAMPING LUBRICANT ACHESON known as MULTAN F 747
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. For industrial use only. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.
store between 40 °F (4.4 °C) and 100 °F (37.8 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents. Nitrites may react with organic amines to form nitrosamines which can cause cancer.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721?
The signal word is danger.
What is the physical form of BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721?
BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721 is a liquid with amber color. It has mild odor.
What is the solubility of BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721?
Complete Water
What is BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721 used for?
Lubricant
What are the hazard statements for BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F).