NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER
Product Code
597346
Synonyms
TURCO WO #1

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 4 H302
Skin Corr. Cat. 1C H314
Eye Dam. Cat. 1 H314

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H302 HARMFUL IF SWALLOWED.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Phosphoric acid 7664-38-2 30 - 60% Yes
2-Butoxyethanol 111-76-2 10 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get immediate medical attention for eye contact and ingestion.

Medical Treatment

Treat the affected person appropriately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store between 40°F and 100°F. (5° and 38°C).

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
---
Flammability
Not applicable
Properties Status
---
Freezing Point
---
State Under Standard Conditions
---
Flash Point
> 220 °F (> 104.44 °C)
Crystallisation Point
---
Solidification Point
---
Colour Intensity
---
Relative Density
1.333 - 1.35
Physical State
Liquid
Relative Evaporation Rate
---
Explosive Limits
---
Solubility In Water
---
Melting Point
Not applicable
Metal Corrosion
---
Vapor Pressure
Not determined
Solubility
Complete Water
Odor
mild
Dynamic Viscosity
Not available.
Colour
Light yellow
Evaporation Rate
Not applicable
Softening Point
---
Lower Explosive Limit
Not applicable
Solubility In Fat
---
Form
---
Ph
< 2.0
Odor Threshold
Not available.
Upper Explosive Limit
Not applicable
Vapor Density
---
Cloud Point
---
Physical State Data
liquid
Decomposition Temperature
Not available.
Appearance
---
Boiling Point
> 200 °F (> 93.3 °C)
Auto Ignition Temperature
Not applicable
Voc Content
161 g/l
Molecular Weight
---
Bulk Density
---
Partition Coefficient
Not determined
Kinematic Viscosity
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1805
Shipping Name
Phosphoric acid solution
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER known by?

BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER is also known as: TURCO WO #1

What is the hazard signal word for BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER?

The signal word is danger.

What is the physical form of BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER?

BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER is a liquid with light yellow color. It has mild odor.

What is the solubility of BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER?

Complete Water

What is BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER used for?

Cleaner

What are the hazard statements for BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER?

This substance has 3 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H302: HARMFUL IF SWALLOWED.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-IC WO 1 AERO ACID DEOXIDIZER?

The melting point is Not applicable and the boiling point is > 200 °F (> 93.3 °C).