Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite Polyseamseal Tub + Tile Caulk
- Product Form
- Sealant
- Product Code
- 1725439
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 30% | No |
| Ethylene glycol | 107-21-1 | 1 - 5% | No |
| Titanium dioxide < 1% particles with diameter ≤ 10 μm | 13463-67-7 | 1 - 5% | No |
| Palygorskite ([Mg(Al0.5-1Fe0-0.5)]Si4(OH)O10.4H2O) | 12174-11-7 | 0.1 - 1% | No |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | No |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Rinse out mouth. Do not drink. Never give anything by mouth to an unconscious person. If adverse health effects develop seek medical attention.
Immediate Medical Attention
Seek immediate medical attention for eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard.
Water may be unsuitable as an extinguishing media, but may be helpful in keeping adjacent containers cool.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Kwik Seal Tub & Tile Adhesive Caulk - Clear
---
Loctite Clear Silicone Sealant
---
Kwik Seal Tub & Tile Adhesive Caulk - All Colors
---
Loctite PSS All Purpose Adhesive Caulk
---
Loctite PL Polyurethane Roof and Flashing Sealant
---
Loctite 2in1 All Purpose Seal & Bond Sealant
---
Loctite® PL® Polyurethane Door, Window and Siding Sealant
---
Touch N Seal One-Component All-Season Foam Sealant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid prolonged or repeated skin contact with this material. Use only in well-ventilated areas. Keep out of the reach of children.
Keep from freezing.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
None known
None expected.
Carbon dioxide. Carbon monoxide. Oxides of nitrogen. Hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite Polyseamseal Tub + Tile Caulk?
The signal word is warning.
What is the physical form of Loctite Polyseamseal Tub + Tile Caulk?
Loctite Polyseamseal Tub + Tile Caulk is a liquid with white color. It has acetate odor.
What is the solubility of Loctite Polyseamseal Tub + Tile Caulk?
Soluble Water
What are the hazard statements for Loctite Polyseamseal Tub + Tile Caulk?
This substance has 2 hazard statements:
- H319: CAUSES SERIOUS EYE IRRITATION.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of Loctite Polyseamseal Tub + Tile Caulk?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F).