Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite PSS All Purpose Adhesive Caulk
- Product Code
- 2713846
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Joint sealants
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 20% | Yes |
| Ethylene glycol | 107-21-1 | 1 - 5% | Yes |
| Talc | 14807-96-6 | 1 - 5% | Yes |
| acetone | 67-64-1 | 1 - 5% | Yes |
| n-butyl acetate | 123-86-4 | 0.1 - 1% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
IDH number: 2713846 Product name: Loctite PSS All Purpose Adhesive Caulk
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash affected area immediately with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Rinse out mouth. Do not drink. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
If symptoms persist, seek medical advice (inhalation); If symptoms develop and persist, get medical attention (skin); seek immediate medical attention (eye); If adverse health effects develop seek medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Water may be unsuitable as an extinguishing media
This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard.
Water may be helpful in keeping adjacent containers cool.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Ventilate area. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Loctite 2in1 All Purpose Seal & Bond Sealant
---
Loctite Spray Adhesive General Purpose
---
Loctite Spray Adhesive Multi Purpose
---
Loctite Spray Adhesive Multi Purpose
---
Loctite Polyseamseal Tub + Tile Caulk
---
Loctite Clear Silicone Sealant
---
Loctite PL Premium Polyurethane Construction Adhesive
---
Loctite® PL® Premium Polyurethane Construction Adhesive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid prolonged or repeated skin contact with this material. Use only with adequate ventilation. Wash hands before breaks and immediately after handling the product. Keep out of the reach of children.
Keep from freezing.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Keep away from open flames, hot surfaces and sources of ignition.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Acetone)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite PSS All Purpose Adhesive Caulk?
The signal word is warning.
What is the physical form of Loctite PSS All Purpose Adhesive Caulk?
Loctite PSS All Purpose Adhesive Caulk is a liquid with blue color. It has sweet odor.
What is Loctite PSS All Purpose Adhesive Caulk used for?
Joint sealants
What are the hazard statements for Loctite PSS All Purpose Adhesive Caulk?
This substance has 3 hazard statements:
- H319: CAUSES SERIOUS EYE IRRITATION
- H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE
- COMBUSTIBLE LIQUID
What is the melting point of Loctite PSS All Purpose Adhesive Caulk?
The melting point is Not available. and the boiling point is 100 °C (212°F).