Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite Spray Adhesive Multi Purpose
- Product Code
- 2280642
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methyl acetate | 79-20-9 | 10 - 30% | Yes |
| acetone | 67-64-1 | 10 - 30% | Yes |
| dimethyl ether | 115-10-6 | 5 - 10% | Yes |
| propane | 74-98-6 | 5 - 10% | Yes |
| Naphtha, hydrotreated light, <0,1% benzene | 64742-49-0 | 5 - 10% | Yes |
| 1,1-Difluoroethane | 75-37-6 | 5 - 10% | Yes |
| n-Heptane | 142-82-5 | 5 - 10% | Yes |
| Styrene butadiene divinylbenzene copolymer | 26471-45-4 | 5 - 10% | Yes |
| Methanol | 67-56-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. In case of adverse health effects seek medical advice.
Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothes.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
If material is ingested, immediately contact a physician or poison control center. Do not induce vomiting: contains petroleum distillates and/or aromatic solvents. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees.
Immediate Medical Attention
If material is ingested, immediately contact a physician or poison control center. In case of contact with the eyes, seek immediate medical attention.
Medical Treatment
This material is an aspiration hazard. Potential danger from aspiration must be weighed against possible oral toxicity when deciding whether to induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Water spray jet
Contents under pressure. Do not handle or store near an open flame, heat or other sources of ignition. Do not puncture or incinerate pressurized containers. Exposure to temperatures above 49°C (120°F) may cause container to burst.
Firefighters should wear self-contained breathing apparatus. Water may be ineffective, but may be used to cool exposed containers to prevent pressure build-up and possible auto-ignition or explosion when exposed to extreme heat. If water is used, fog nozzles are preferable.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Loctite Spray Adhesive Multi Purpose
---
Weldwood Multi Purpose Spray Adhesive
---
Loctite 2in1 All Purpose Seal & Bond Sealant
---
Loctite Power Grab All Purpose Express
---
Loctite 7500
---
Loctite Super Glue Precision
---
LOCTITE SUPER GLUE
---
Loctite Power Grab Heavy Duty Express
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep out of the reach of children. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not smoke, do not weld. Do not puncture or incinerate pressurized containers.
Store at or below 50 °C (122°F). Keep away from heat, spark and flame. Store in a cool, dry, well-ventilated area.
Wash thoroughly after handling.
Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do not smoke, do not weld.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not available.
Not available.
None under normal processing.
Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F). Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong oxidizing agents.
Oxides of carbon. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite Spray Adhesive Multi Purpose?
The signal word is danger.
What is the physical form of Loctite Spray Adhesive Multi Purpose?
Loctite Spray Adhesive Multi Purpose is a aerosol with no information available. color. It has hydrocarbons odor.
What is the solubility of Loctite Spray Adhesive Multi Purpose?
Insoluble
What are the hazard statements for Loctite Spray Adhesive Multi Purpose?
This substance has 5 hazard statements:
- H222: EXTREMELY FLAMMABLE AEROSOL.
- H229: PRESSURIZED CONTAINER: MAY BURST IF HEATED.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of Loctite Spray Adhesive Multi Purpose?
The melting point is Not available. and the boiling point is 7 °C (44.6 °F).