Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426
- Product Code
- 1794749
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface pretreatment
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Cupric nitrate (3251-23-8) 5 - 10 %
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cupric nitrate | 3251-23-8 | 5 - 10% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. Get medical attention.
For skin contact flush with large amounts of water. Remove contaminated clothing and footwear. Wash clothing before reuse. Obtain medical attention if irritation persists.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get medical attention for inhalation; seek immediate medical attention for eye contact; obtain medical attention if irritation persists for skin contact; immediately contact a physician or poison control center for ingestion.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
This product is an aqueous mixture which will not burn. If evaporated to dryness, solid residue is an oxidizing agent and may cause spontaneous ignition of combustible materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
BONDERITE M-AD 2 PRETREATMENT ADDITIVE known as PARCO ADDITIVE 2
---
BONDERITE M-AD 35
---
BONDERITE M-AD 505 PRETREATMENT ADDITIVE known as STARTER 505 CONT1500
---
BONDERITE M-PT R 400RA POST TREATMENT
---
BONDERITE M-PT R 400 POST TREATMENT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong alkalies.
None under normal processing.
Store away from incompatible materials.
Strong alkalis.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426?
The signal word is danger.
What is the physical form of BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426?
BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426 is a liquid with blue color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426?
Complete Aqueous solution
What is BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426 used for?
Surface pretreatment
What are the hazard statements for BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426?
This substance has 3 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F) Boiling point.