Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE
- Synonyms
- 748 ADDITIVE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium nitrate | 13477-34-4 | 60 - 80% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation, skin). Seek medical attention at once (eye). If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value.
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water only.
Do not use dry chemicals, carbon dioxide, or foam.
This product is an aqueous mixture which will not burn. If evaporated to dryness, solid residue is an oxidizing agent and may cause spontaneous ignition of combustible materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE M-AD A PRETREATMENT ADDITIVE known as ADDITIVE A
---
BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426
---
BONDERITE M-AD 319 PRETREATMENT ADDITIVE known as ADDITIVE 319
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
BONDERITE M-AD 10 PRETREATMENT ADDITIVE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally. Provide adequate ventilation. Wash thoroughly after handling.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
Will not occur.
Bringing this product into contact with combustible material may cause a fire.
Reducing agents.
Decomposes with heat to produce oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE known by?
BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE is also known as: 748 ADDITIVE
What is the hazard signal word for BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE?
The signal word is warning.
What is the physical form of BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE?
BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE is a liquid with colourless / colorless color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE?
Complete Water
What is BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE?
This substance has 2 hazard statements:
- H315 + H320: CAUSES SKIN AND EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE M-AD 748 PRETREATMENT ADDITIVE known as 748 ADDITIVE?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.