Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD TONER S PRETREATMENT ADDITIVE
- Product Code
- 1719770
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Ferric nitrate | 10421-48-4 | 30 - 60
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ferric nitrate | 10421-48-4 | 30 - 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If not breathing, give artificial respiration. Get medical attention.
In case of contact, immediately remove contaminated clothing and flush skin with copious amounts of water. Get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water only.
Do not use dry chemicals, carbon dioxide, or foam.
This product is an aqueous mixture which will not burn.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Thoroughly wash the area with water after a spill or leak clean-up. Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 10 PRETREATMENT ADDITIVE
---
BONDERITE M-NT 2600 TONER AERO PRETREATMENT ADDITIVE
---
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD A PRETREATMENT ADDITIVE known as ADDITIVE A
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. Do not take internally.
Store in a cool, dry, well-ventilated area. Thaw and mix thoroughly if frozen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
This product is an OXIDIZING AGENT - avoid contact with organic material. High temperatures.
Keep away from organic and combustible materials.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3218
- Shipping Name
- Nitrates, inorganic, aqueous solution, n.o.s. (Ferric(III) nitrate)
- Transport Class
- 5.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD TONER S PRETREATMENT ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE M-AD TONER S PRETREATMENT ADDITIVE?
BONDERITE M-AD TONER S PRETREATMENT ADDITIVE is a liquid with light brown color. It has mild odor.
What is the solubility of BONDERITE M-AD TONER S PRETREATMENT ADDITIVE?
Complete Water
What is BONDERITE M-AD TONER S PRETREATMENT ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE M-AD TONER S PRETREATMENT ADDITIVE?
This substance has 3 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-AD TONER S PRETREATMENT ADDITIVE?
The melting point is Not determined and the boiling point is 100 °C (212°F)Estimated.