Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG
- Product Code
- 2984181
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide | 1310-73-2 | 5 - 10% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. Remove contaminated clothing and footwear. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Dike the spilled material, where this is possible. Do not allow product to enter sewer or waterways.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG
---
BONDERITE M-AD 229 PRETREATMENT ADDITIVE DR272KG
---
BONDERITE M-AD 10 PRETREATMENT ADDITIVE
---
BONDERITE M-AD ZN2 PRETREATMENT ADDITIVE DR302KG
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 101 PRETREATMENT ADDITIVE IBC1623KG
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only.
Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
None identified.
This product reacts with acids.
None expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1824
- Shipping Name
- Sodium hydroxide solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG?
The signal word is danger.
What is the physical form of BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG?
BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG is a liquid with white color.
What is the solubility of BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG?
Complete Water
What is BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG used for?
Additive
What are the hazard statements for BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG?
This substance has 2 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG?
The melting point is Not determined and the boiling point is Not determined.