Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PU 8512 TF
- Product Code
- 1101475
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Primer
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl acetate | 141-78-6 | 30 - 60% | Yes |
| 1,3-Bis(isocyanatomethyl)cyclohexane, trimethylolpropane copolymer | 39527-44-1 | 10 - 30% | Yes |
| Carbon black | 1333-86-4 | 10 - 30% | Yes |
| 2-methoxy-1-methylethyl acetate | 108-65-6 | 5 - 10% | Yes |
| n-butyl acetate | 123-86-4 | 5 - 10% | Yes |
| Oxirane, 2-[[3-(trimethoxysilyl)propoxy]methyl]-, homopolymer | 56325-93-0 | 1 - 5% | Yes |
| CP polym. MDI, Amine, PG & PO | --- | 1 - 5% | Yes |
| Polymeric diphenylmethane diisocyanate | 9016-87-9 | 1 - 5% | Yes |
| tetraethyl silicate | 78-10-4 | 1 - 5% | Yes |
| N-(3-(Trimethoxysilyl)propyl)ethylenediamine | 1760-24-3 | 1 - 5% | Yes |
| Methylenebis(phenylisocyanate) | 101-68-8 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Rinse the mouth. Drink 1-2 glasses of water. Do not induce vomiting. Get immediate medical attention.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation, skin). Seek immediate medical attention (eye, ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Vapors are heavier than air and may travel to ignition sources and flash back. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Not available.
Keep the container tightly closed and in a cool, well-ventilated place. Store in tightly closed containers to prevent moisture contamination.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, spark and flame.
Reacts with water. Reacts with alcohols and amines.
Isocyanates. carbon monoxide carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PU 8512 TF?
The signal word is danger.
What is the physical form of TEROSON PU 8512 TF?
TEROSON PU 8512 TF is a liquid with black color. It has of solvent odor.
What is TEROSON PU 8512 TF used for?
Primer
What are the hazard statements for TEROSON PU 8512 TF?
This substance has 6 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of TEROSON PU 8512 TF?
The melting point is Not applicable, Product is a liquid and the boiling point is 77 °C (170.6 °F) 1,013 hPano method / method unknown.