Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L
- Product Code
- 594474
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Remove contaminated clothing and footwear. Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is an aqueous mixture which will not burn. May react with metals to form flammable hydrogen gas.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ED 9000L known as COLORMAX 9000L
---
BONDERITE M-ED 9000A ANODIZING ADDITIVE
---
BONDERITE M-ED ST-2 known as COLORMAX ST-2 ENHANCER
---
BONDERITE M-ED EA1022 ANODIZING ADDITIVE
---
BONDERITE M-ED ST-3 ANODIZING ADDITIVE known as ALMECOLOR ST-3
---
BONDERITE M-ED ALUMINUX LL ANODIZING
---
BONDERITE M-AD 100FL PRETREATMENT ADDITIVE known as ADDITIVE 100
---
BONDERITE M-AD 110 PRETREATMENT ADDITIVE known as ADDITIVE 110
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. Wash thoroughly after handling. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing, freezing temperature is <=32F (<=0C).
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
May react with strong bases or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Sulfuric acid, Sulphamic acid)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L?
The signal word is danger.
What is the physical form of BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L?
BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L is a liquid with clear color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L?
Complete Water
What are the hazard statements for BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L?
This substance has 3 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H350: MAY CAUSE CANCER.
What is the melting point of BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L?
The melting point is 30 °F (-1.1 °C) and the boiling point is >215 °F (>101.7 °C).