Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ED EA1022 ANODIZING ADDITIVE
- Synonyms
- EA1022
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk.
Immediate Medical Attention
Seek immediate medical attention for eye contact. Get medical attention if symptoms develop and persist for inhalation, skin contact, or ingestion.
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water only.
Do not use dry chemicals, carbon dioxide, or foam.
This product is an oxidizing agent and is a serious fire and explosion risk. Do not permit contact with combustible, organic, or other oxidizable materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ED ALUMINUX LL ANODIZING
---
BONDERITE® C-M-ED 50002 P2
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE M-FE 10100
---
BONDERITE S-AD 5668-1 AERO ADDITIVE
---
BONDERITE M-AD 100 ADDITIVE IBC1942KG
---
BONDERITE M-ED ST-2 known as COLORMAX ST-2 ENHANCER
---
BONDERITE 902 RB
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe gas/fumes/vapor/spray. For industrial use only. Do not take internally. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Bringing this product into contact with combustible material may cause a fire. Keep away from heat, ignition sources and incompatible materials.
Reacts with acids. Adding water to this product may cause localized overheating and splattering. This product may react with ammonium compounds and reducing agents, particularly cyanides, thiocyanates and thiosulfates. Sodium nitrite may react with organic amines to form nitrosamines. Explosive HYDROGEN GAS may be released if aqueous solutions of this material come into contact with reactive metals (IRON, ZINC, ALUMINUM).
Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-ED EA1022 ANODIZING ADDITIVE known by?
BONDERITE M-ED EA1022 ANODIZING ADDITIVE is also known as: EA1022
What is the hazard signal word for BONDERITE M-ED EA1022 ANODIZING ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE M-ED EA1022 ANODIZING ADDITIVE?
BONDERITE M-ED EA1022 ANODIZING ADDITIVE is a liquid with light amber color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-ED EA1022 ANODIZING ADDITIVE?
Complete Water
What is BONDERITE M-ED EA1022 ANODIZING ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE M-ED EA1022 ANODIZING ADDITIVE?
This substance has 4 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-ED EA1022 ANODIZING ADDITIVE?
The melting point is Not determined and the boiling point is 212 °F (100°C)calculated.