Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ED 9000A ANODIZING ADDITIVE
- Product Code
- 592659
- Synonyms
- COLORMAX 9000A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Auxiliary product
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetominophen (4-Hydroxyacetanilide) | 103-90-2 | 60 - 80% | Yes |
| pyrogallol | 87-66-1 | 10 - 30% | Yes |
| Sulfamic acid | 5329-14-6 | 5 - 10% | Yes |
| (+)-Tartaric acid | 87-69-4 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Remove contaminated clothing and footwear. Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention.
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value. Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
High concentration of airborne dust may form explosive mixture with air. May react with metals to form flammable hydrogen gas.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE M-ED EA1022 ANODIZING ADDITIVE
---
BONDERITE M-ED 9000L ANODIZING ADDITIVE known as COLORMAX 9000L
---
BONDERITE M-ED ALUMINUX LL ANODIZING
---
BONDERITE M-ED ST-3 ANODIZING ADDITIVE known as ALMECOLOR ST-3
---
BONDERITE M-ED SEAL MT ADDITIVE
---
BONDERITE M-AD A PRETREATMENT ADDITIVE known as ADDITIVE A
---
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear chemical goggles and / or face shield.
If ventilation is not sufficient to effectively prevent buildup of dust, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
Keep away from organic materials, combustible materials, alkalis and metals. This product may react with oxidizing agents. Reaction with strong acids.
Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons. Oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2967
- Shipping Name
- Sulphamic acid mixture
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-ED 9000A ANODIZING ADDITIVE known by?
BONDERITE M-ED 9000A ANODIZING ADDITIVE is also known as: COLORMAX 9000A
What is the hazard signal word for BONDERITE M-ED 9000A ANODIZING ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE M-ED 9000A ANODIZING ADDITIVE?
BONDERITE M-ED 9000A ANODIZING ADDITIVE is a solid with white color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-ED 9000A ANODIZING ADDITIVE?
Appreciable Water
What is BONDERITE M-ED 9000A ANODIZING ADDITIVE used for?
Auxiliary product
What are the hazard statements for BONDERITE M-ED 9000A ANODIZING ADDITIVE?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
What is the melting point of BONDERITE M-ED 9000A ANODIZING ADDITIVE?
The melting point is Not available. and the boiling point is Not applicable.