Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G
- Product Code
- 1646094
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion inhibitor
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium nitrite | 7632-00-0 | 10 - 30% | Yes |
| Sodium 2-ethylhexanoate | 19766-89-3 | 1 - 5% | Yes |
IDH number: 1646094 Product name: BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G IDH number: 1646094 Product name: BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G Page 2 of 5
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation/skin). Seek immediate medical attention (eye/ingestion).
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
If evaporated to dryness, solid residue is an oxidizing agent and may cause spontaneous ignition of combustible materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Contain spill. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP 4232 CORROSION INHIBITOR
---
BONDERITE L-GP SN 400C CORROSION INHIBITOR
---
BONDERITE L-GP 5800 CORROSION INHIBITOR
---
BONDERITE L-GP 100 CORROSION INHIBITOR ACHESON known as PENNSTEEL 100
---
BONDERITE L-GP VO 2CA RUST PREVENTATIVE ACHESON
---
BONDERITE L-GP 4232 CORROSION INHIBITOR known as RP - 4232
---
BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO
---
BONDERITE L-GP 154K ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. Keep container closed. Use only with adequate ventilation. For industrial use only. Do not reuse the empty container. Do not mix this product with material which contain AMINES. NITROSAMINE may be formed.
Store in a cool, dry, well-ventilated area. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Do not allow chemical to dry in the presence of organic materials.
Nitrites may react with organic amines to form nitrosamines which can cause cancer.
None identified.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3287
- Shipping Name
- Toxic liquid, inorganic, n.o.s. (Sodium nitrite)
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G?
The signal word is danger.
What is the physical form of BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G?
BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G is a liquid with blue color. It has bland odor.
What is BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G used for?
Corrosion inhibitor
What are the hazard statements for BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G?
This substance has 2 hazard statements:
- H301: TOXIC IF SWALLOWED
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD
What is the melting point of BONDERITE L-GP CP-30G CORROSION INHIBITOR ACHESON known as CP-30G?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.