Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO
- Product Code
- 2685578
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Graphite | 7782-42-5 | 30 - 60% | Yes |
| Petrolatum | 8009-03-8 | 30 - 60% | Yes |
| White mineral oil (petroleum), highly refined | 8042-47-5 | 10 - 30% | Yes |
IDH number: 2685578 Product name: BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
Rinse immediately with plenty of water for 15 minutes.
Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get medical attention. Seek immediate medical attention for eye contact.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP 4232 CORROSION INHIBITOR
---
BONDERITE L-GP 5800 CORROSION INHIBITOR
---
BONDERITE L-GP SN 400C CORROSION INHIBITOR
---
BONDERITE L-GP 4232 CORROSION INHIBITOR known as RP - 4232
---
BONDERITE L-GP GP 460 AEROACHES
---
BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750
---
BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501
---
BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
For safe storage, store between 8 °C (46.4 °F) and 28 °C (82.4 °F)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. High temperatures.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO?
The signal word is no signal word.
What is the physical form of BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO?
BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO is a liquid with gray / grey color. It has slight odor.
What is the solubility of BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO?
Negligible
What is BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO used for?
Lubricant
What is the melting point of BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO?
The melting point is Not applicable, Product is a liquid and the boiling point is 300 °C (572°F)calculated.