Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153
- Product Code
- 1224834
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal forming product
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Frits, chemicals (without components which has to be classified) | 65997-18-4 | 30 - 60% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention (ingestion). Seek medical attention at once (eye contact).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Isolate area. Keep unnecessary personnel away.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FG 151 FORGING LUBRICANT ACHESON known as DELTAGLAZE151
---
BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349
---
BONDERITE L-FG 69 FORGING LUBRICANT ACHESON known as DELTAGLAZE69
---
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 566AL GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 185 FORGING LUBRICANT ACHESON known as P3 FORGE 185
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Store in a cool, dry, well-ventilated area. Keep container closed. Store in original container until ready to use. Protect from direct sunlight. Keep from freezing. Keep out of reach of children and away from food and drink.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Gloves should be tested to determine suitability for prolonged contact. Wear impervious gloves for prolonged contact.
Wear safety glasses; chemical goggles (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153?
The signal word is warning.
What is the physical form of BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153?
BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153 is a liquid with dark violet color. It has not available. odor.
What is the solubility of BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153?
Dispersible Water
What is BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153 used for?
Metal forming product
What are the hazard statements for BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153?
This substance has 1 hazard statement:
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153?
The melting point is Not applicable, Product is a liquid and the boiling point is >= 100 °C (>= 212°F).