Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349
- Product Code
- 1224777
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Propanol | 67-63-0 | 30 - 40% | Yes |
| Boric acid | 10043-35-3 | 10 - 20% | Yes |
| Stoddard solvent, <0.1% Benzene | 8052-41-3 | 10 - 20% | Yes |
| Xylenes | 1330-20-7 | 5 - 10% | Yes |
| Borax | 1330-43-4 | 1 - 5% | Yes |
| Ethylbenzene | 100-41-4 | 0.1 - 1% | Yes |
| Quartz (SiO2) | 14808-60-7 | 0.1 - 1% | Yes |
| Naphthalene | 91-20-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Do not induce vomiting. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation); Obtain medical attention if irritation persists (skin); Seek medical attention at once (eye); Get immediate medical attention (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Fire and Explosion hazards are DANGEROUS when this material is exposed to heat or flame.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Prevent further leakage or spillage if safe to do so.
Prevent further leakage or spillage if safe to do so. Isolate area. Keep unnecessary personnel away. Block any potential routes to water systems. Wear appropriate protective equipment and clothing during clean-up.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FG 153 FORGING LUBRICANT ACHESON known as DELTAGLAZE153
---
BONDERITE L-FG 69 FORGING LUBRICANT ACHESON known as DELTAGLAZE69
---
BONDERITE L-FG 151 FORGING LUBRICANT ACHESON known as DELTAGLAZE151
---
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 566AL GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Remove all sources of ignition. Use only with adequate ventilation. Make sure containers are properly grounded before use or transfer of material.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store away from heat, sparks, flames, or other sources of ignition.
Avoid contact with eyes, skin and clothing.
Remove all sources of ignition. Store away from heat, sparks, flames, or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid excessive heat and ignition sources. High temperatures.
This product may react with oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349?
The signal word is danger.
What is the physical form of BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349?
BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349 is a liquid appearing as gray with gray color. It has alcoholic odor.
What is BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349 used for?
Coating
What are the hazard statements for BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349?
This substance has 8 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H350: MAY CAUSE CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE L-FG DG 349 FORGING LUBRICANT ACHESON known as DELTAGLAZE349?
The melting point is -89 °C (-128.2 °F) and the boiling point is 82 °C (179.6 °F).