Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dry film lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Boric acid | 10043-35-3 | 5 - 10% | Yes |
| Fatty acids, tallow, sodium salts | 8052-48-0 | 5 - 10% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
For skin contact flush with large amounts of water. If adverse health effects develop seek medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.
Sweep up or gather material and place in appropriate container for disposal. Wash spill area thoroughly.
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM F 738 FORMING LUBRICANT ACHESON known as MULTAN F 738
---
BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721
---
BONDERITE L-FM F 750 STAMPING LUBRICANT ACHESON known as MULTAN F 750
---
BONDERITE L-FM PL 633 STAMPING LUBRICANT ACHESON known as MULTAN PL 633
---
BONDERITE L-FM F B27MC6A STAMPING LUBRICANT ACHESON known as MULTAN F B2 7MC6A 9
---
BONDERITE L-FM 235 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PRELUBE MP-404
---
BONDERITE L-FM PL 1453 ACHESON STAMPING LUBRICANT known as MULTAN PL 1453
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally.
Keep closed in a cool, dry area. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong acids or oxidizing agents.
None under normal processing.
None identified.
Not available.
Upon decomposition, this product emits carbon monoxide, carbon dioxide, and boron oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M?
The signal word is warning.
What is the physical form of BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M?
BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M is a liquid with off white color. It has mild odor.
What is the solubility of BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M?
Complete Water
What is BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M used for?
Dry film lubricant
What are the hazard statements for BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M?
This substance has 1 hazard statement:
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M?
The melting point is Not determined and the boiling point is 100 °C (212°F)calculated.