Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089
- Product Code
- 1182761
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
1-c- epoxide adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 30 - 60% | Yes |
| 2,2'-[(1-Methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane | 1675-54-3 | 10 - 30% | Yes |
| Calcium oxide | 1305-78-8 | 1 - 5% | Yes |
| Tris(methylphenyl) phosphate | 1330-78-5 | 1 - 5% | Yes |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | Yes |
| Calcium carbonate | 471-34-1 | 1 - 5% | Yes |
| trixylyl phosphate | 25155-23-1 | 0.1 - 1% | Yes |
| 4-tert-butylphenol | 98-54-4 | 0.1 - 1% | Yes |
| Neopentyl glycol diglycidyl ether | 17557-23-2 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of dust or fumes from overheating or combustion.
For skin contact flush with large amounts of water. If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON EP 5089 STRUCTURAL ADHESIVE known as Terokal 5089 19 Kgs
---
TEROSON PV 5308 FLANGE BONDING ADHESIVE known as TEROKAL 5308
---
TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant
---
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805
---
TEROSON PV 1273 ANTI-FLUTTER ADHESIVE known as TEROSTAT 06-1273
---
TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM
---
TEROSON PV 1095 C PAINT SHOP SEALANT known as TEROLAN SA-1095C
---
TEROSON PV 1035.1 PAINT SHOP SEALANT known as TEROLAN 1035.1
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Do not handle or store near an open flame, heat or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Reaction with some curing agents may produce considerable heat. Run-a-way cure reactions (polymerization) may char and decompose the resin system. Fumes and vapors from these thermal and chemical decompositions vary widely in composition and toxicity. Avoid excessive heat and ignition sources.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089?
The signal word is danger.
What is the physical form of TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089?
TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089 is a liquid with purple color. It has mild odor.
What is the solubility of TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089?
Negligible Water
What is TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089 used for?
1-c- epoxide adhesive
What are the hazard statements for TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089?
The melting point is Not applicable and the boiling point is > 200 °C (> 392°F)calculated.