Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C
- Product Code
- FP4660-V25A1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Encapsulant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, vitreous | 60676-86-0 | 60 - 80% | No |
| Silicon dioxide | 7631-86-9 | 5 - 10% | No |
| hexahydromethylphthalic anhydride | 25550-51-0 | 5 - 10% | No |
| Epoxy resin | --- | 1 - 5% | No |
| Cycloaliphatic epoxy | --- | 1 - 5% | No |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | No |
| Substituted phthalic anhydride | 34090-76-1 | 0.1 - 1% | No |
| Epoxy resin | --- | 0.1 - 1% | No |
| Epoxy resin | --- | 0.1 - 1% | No |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | No |
| Imidazole salt | --- | 0.1 - 1% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ECCOBOND EO1060 known as HYSOL EO1060 30CC ONE COMP -40C
---
LOCTITE ECCOBOND FP4655 30CC
---
LOCTITE ECCOBOND FP0097 30CC
---
LOCTITE ECCOBOND FP4526 30CC
---
LOCTITE ECCOBOND FP4549 30CC
---
LOCTITE ECCOBOND FP4655 known as 30CC FP4655 LWSTRESS EN/CH - 40C
---
LOCTITE ECCOBOND FP 5201 known as Hysol FP5201 (8G)
---
LOCTITE ECCOBOND FP4650 30ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. High temperatures.
Oxidizing agents. Acids. Bases. Alcohols. Amines. Ammonia. Sodium. Magnesium. Zinc. Water.
Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Hydrocarbons. Aldehydes. Phenolics.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C?
The signal word is danger.
What is the physical form of LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C?
LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C is a liquid with black color.
What is LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C used for?
Encapsulant
What are the hazard statements for LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C?
This substance has 4 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
What is the melting point of LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C?
The melting point is Not available. and the boiling point is Not available..