Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER
- Product Code
- 490734
- Synonyms
- 16 HC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion Protection Coating for Metals
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc nitrate | 7779-88-6 | 10 - 30% | No |
| Zinc dihydrogen phosphate | 13598-37-3 | 10 - 30% | No |
| Phosphoric acid | 7664-38-2 | 5 - 10% | No |
| Cobalt dinitrate | 10141-05-6 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Seek medical advice. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 952 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 958 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 1421 HS R D ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3080 R ZINC PHOSPHATE REPLENISHER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Provide adequate ventilation. Do not take internally. Wash thoroughly after handling. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies. May react with organic amines to form carcinogenic nitrosamines.
Decomposes with heat to produce oxides of nitrogen. Oxides of phosphorus.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Zinc nitrate)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER known by?
BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER is also known as: 16 HC
What is the hazard signal word for BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER?
BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER is a liquid with pink color. It has sour/acid odor.
What is the solubility of BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER?
Not applicable
What is BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER used for?
Corrosion Protection Coating for Metals
What are the hazard statements for BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER?
This substance has 8 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H290: MAY BE CORROSIVE TO METALS.
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.