Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %*
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc dihydrogen phosphate | 13598-37-3 | 10 - 30% | Yes |
| Manganese dihydrogen phosphate | 18718-07-5 | 5 - 10% | Yes |
| Hydroxylamine sulfate | 10039-54-0 | 5 - 10% | Yes |
| Hydroxylamine phosphate | 19098-16-9 | 1 - 5% | Yes |
| Zinc nitrate | 7779-88-6 | 1 - 5% | Yes |
| Phosphoric acid | 7664-38-2 | 1 - 5% | Yes |
| Hydrogen fluoride | 7664-39-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value. Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN 1421-A R N ZINC PHOSPHATE known as BONDERITE 1421-A REPLENISHER N
---
BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 1421 HS R D ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 958 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 952 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies.
Decomposes with heat to produce oxides of nitrogen. Oxides of sulfur. May liberate hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Hydroxylamine sulfate)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER?
The signal word is danger.
What is the physical form of BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER?
BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER is a liquid with pink color. It has neutral odor.
What is the solubility of BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER?
Complete Water
What is BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER used for?
Conversion coating
What are the hazard statements for BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER?
This substance has 6 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H351: SUSPECTED OF CAUSING CANCER.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-ZN ZM-1 ZINC PHOSPHATE known as BONDERITE ZM-1 REPLENISHER?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.