Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE GC 18 SAC305T4 885V
- Product Form
- Solder Paste
- Product Code
- 2715058
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tin | 7440-31-5 | 80 - 100% | Yes |
| Silver | 7440-22-4 | 1 - 5% | Yes |
| rosin | 8050-09-7 | 1 - 5% | Yes |
| Diethylene glycol monohexyl ether | 112-59-4 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get immediate medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Do not use water on fires where molten metal is present.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Wear protective clothing, gloves and safety glasses. Scrape up spilled material and place in a closed container for disposal.
Materials: closed container
Related Products
Similar products with comparable safety profiles
LOCTITE GC 3W SAC305T4 895V 52M
---
LOCTITE HF 212 SAC305T5 885 59M
---
LOCTITE HF 228 90ISCT4 885V 67M
---
LOCTITE 454 CR850G
---
LOCTITE TEMPERKOTE 850 18 WH 5G
---
LOCTITE LB 8008 C5-A
---
LOCTITE WS 200 SN63AGS89.5V
---
LOCTITE LF 318 96SCAGS88.5V B known as 96SC LF318 AGS88.5V 500G/J
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Avoid contact with eyes, skin and clothing. Avoid skin contact with molten resins. When using, do not eat, drink or smoke. Wash thoroughly after handling.
Store in original container until ready to use. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using, do not eat, drink or smoke. Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Will not occur.
Solder alloy will react with concentrated nitric acid to produce toxic fumes of nitrogen oxides.
Strong oxidizing agents. Strong acids and strong bases. Strong reducing agents. Aldehydes. Ketones. Ammonium nitrates. Chlorine.
Oxides of carbon. Oxides of nitrogen. Ammonia. Hydrogen cyanide. Formaldehyde Metal oxide fumes. Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE GC 18 SAC305T4 885V?
The signal word is danger.
What is the physical form of LOCTITE GC 18 SAC305T4 885V?
LOCTITE GC 18 SAC305T4 885V is a solid with gray / grey color. It has mild odor.
What is the solubility of LOCTITE GC 18 SAC305T4 885V?
Not available.
What are the hazard statements for LOCTITE GC 18 SAC305T4 885V?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of LOCTITE GC 18 SAC305T4 885V?
The melting point is 217 °C (422.6 °F) and the boiling point is 228 °C (442.4 °F).